Satellite remote sensing plays an important role in the monitoring of surface water for historical analysis and near real-time applications. Due to its cloud penetrating capability, many studies have focused on providing efficient and high quality methods for surface water mapping using Synthetic Aperture Radar (SAR). However, few studies have explored the effects of SAR pre-processing steps used and the subsequent results as inputs into surface water mapping algorithms. This study leverages the Google Earth Engine to compare two unsupervised histogram-based thresholding surface water mapping algorithms utilizing two distinct pre-processed Sentinel-1 SAR datasets, specifically one with and one without terrain correction. The resulting surface water maps from the four different collections were validated with user-interpreted samples from high-resolution Planet Scope data. It was found that the overall accuracy from the four collections ranged from 92% to 95% with Cohen’s Kappa coefficients ranging from 0.7999 to 0.8427. The thresholding algorithm that samples a histogram based on water edge information performed best with a maximum accuracy of 95%. While the accuracies varied between methods it was found that there is no statistical significant difference between the errors of the different collections. Furthermore, the surface water maps generated from the terrain corrected data resulted in a intersection over union metrics of 95.8%–96.4%, showing greater spatial agreement, as compared to 92.3%–93.1% intersection over union using the non-terrain corrected data. Overall, it was found that algorithms using terrain correction yield higher overall accuracy and yielded a greater spatial agreement between methods. However, differences between the approaches presented in this paper were not found to be significant suggesting both methods are valid for generating accurate surface water maps. High accuracy surface water maps are critical to disaster planning and response efforts, thus results from this study can help inform SAR data users on the pre-processing steps needed and its effects as inputs on algorithms for surface water mapping applications.

Forests in Southeast Asia are experiencing some of the highest rates of deforestation and degradation in the world, with natural forest species being replaced by cropland and plantation monoculture. In this work, we have developed an innovative method to accurately map rubber and palm oil plantations using fusion of Landsat-8, Sentinel 1 and 2. We applied cloud and shadow masking, bidirectional reflectance distribution function (BRDF), atmospheric and topographic corrections to the optical imagery and a speckle filter and harmonics for Synthetic Aperture Radar (SAR) data. In this workflow, we created yearly composites for all sensors and combined the data into a single composite. A series of covariates were calculated from optical bands and sampled using reference data of the land cover classes including surface water, forest, urban and built-up, cropland, rubber, palm oil and mangrove. This training dataset was used to create biophysical probability layers (primitives) for each class. These primitives were then used to create land cover and probability maps in a decision tree logic and Monte-Carlo simulations. Validation showed good overall accuracy (84%) for the years 2017 and 2018. Filtering for validation points with high error estimates improved the accuracy up to 91%. We demonstrated and concluded that error quantification is an essential step in land cover classification and land cover change detection. Our overall analysis supports and presents a path for improving present assessments for sustainable supply chain analyses and associated recommendations.

Depending on the amount of aeolian sediment input and dune erosion, dune size and morphology change over time. Since coastal foredunes play an important role in the Dutch coastal defence, it is important to have good insight in the main factors that control these changes. In this paper the temporal variations in foredune erosion and accretion were studied in relation to proxies for aeolian transport potential and storminess using yearly elevation measurements from 1965 to 2012 for six sections of the Dutch coast. Longshore differences in the relative impacts of erosion and accretion were examined in relation to local beach width. The results show that temporal variability in foredune accretion and erosion is highest in narrow beach sections. Here, dune erosion alternates with accretion, with variability displaying strong correlations with yearly values of storminess (maximum sea levels). In wider beach sections, dune erosion is less frequent, with lower temporal variability and stronger correlations with time series of transport potential. In erosion dominated years, eroded volumes decrease from narrow to wider beaches. When accretion dominates, dune-volume changes are relatively constant alongshore. Dune erosion is therefore suggested to control spatial variability in dune-volume changes. On a scale of decades, the volume of foredunes tends to increase more on wider beaches. However, where widths exceed 200 to 300 m, this trend is no longer observed.

Surface moisture is an important supply limiting factor for aeolian sand transport, which is the primary driver of coastal dune development. As such, it is critical to account for the control of surface moisture on available sand for dune building. Optical remote sensing has the potential to measure surface moisture at a high spatio-temporal resolution. It is based on the principle that wet sand appears darker than dry sand: it is less reflective. The goals of this study are (1) to measure and model reflectance under controlled laboratory conditions as function of wavelength ( ) and surface moisture ( ) over the optical domain of 350–2500 nm, and (2) to explore the implications of our laboratory findings for accurately mapping the distribution of surface moisture under natural conditions. A laboratory spectroscopy experiment was conducted to measure spectral reflectance (1 nm interval) under different surface moisture conditions using beach sand. A non-linear increase of reflectance upon drying was observed over the full range of wavelengths. Two models were developed and tested. The first model is grounded in optics and describes the proportional contribution of scattering and absorption of light by pore water in an unsaturated sand matrix. The second model is grounded in soil physics and links the hydraulic behaviour of pore water in an unsaturated sand matrix to its optical properties. The optical model performed well for volumetric moisture content 24% ( 0.97), but underestimated reflectance for between 24–30% ( 0.92), most notable around the 1940 nm water absorption peak. The soil-physical model performed very well ( 0.99) but is limited to 4% 24%. Results from a field experiment show that a short-wave infrared terrestrial laser scanner ( = 1550 nm) can accurately relate surface moisture to reflectance (standard error 2.6%), demonstrating its potential to derive spatially extensive surface moisture maps of a natural coastal beach.