For the transition to emission-free or low-emission energy, hydrogen is a promising energy carrier and fuel of the future with the possibility of long-term storage. Due to its specific properties, it poses certain safety risks; therefore, it is necessary to have a comprehensive understanding of hydrogen. This review article contains ten main chapters and provides, by synthesizing current findings primarily from standards and scientific studies (predominantly from 2023 to 2024), the theoretical basis for further research directed toward safe hydrogen infrastructure.
For the transition to emission-free or low-emission energy, hydrogen is a promising energy carrier and fuel of the future with the possibility of long-term storage. Due to its specific properties, it poses certain safety risks; therefore, it is necessary to have a comprehensive understanding of hydrogen. This review article contains ten main chapters and provides, by synthesizing current findings primarily from standards and scientific studies (predominantly from 2023–2024), the theoretical basis for further research directed toward safe hydrogen infrastructure.
Particles emitted from combustion sources have a negative impact on human health and the environment. The solid fuel boilers that are used in households are a significant source of air pollution. The present study analyzes particulate matter (PM) produced during the combustion of wood pellets, wood logs, and coke in a residential boiler. The captured particles’ particle size distribution, bulk density, and cohesion are identified. A cascade impactor was used to capture the particles, and an optical digital microscope was used to determine the bulk density and cohesion (angle of repose) of the particles. The results show that the highest particle mass concentration emitted by the boiler falls within the interval of 89–146 nm, with the combustion of wood logs producing the most particles and coke combustion producing the least. The bulk density of particles of 51–595 nm (impactor stages 4–8) ranges from 320 to 785 kg/m3 for wood logs, 372–1108 kg/m3 for wood pellets, and 435–1330 kg/m3 for coke. The PM1 particles (impactor stage 4) have the highest bulk density. In the particle size range studied, the bulk density of particles decreases significantly with increasing particle size.
Solid fuel combustion produces harmful particulate matter (PM) and gaseous emissions in the flue gas. To mitigate PM, advanced filtration materials using metal meshes, metal composites, and MOF-polymer composites have been studied. Gaseous emissions can be adsorbed using metal-organic frameworks (MOFs). Metal filters are suitable for high-temperature flue gas filtration (>200 °C) thanks to their high mechanical strength and thermal stability. This review covers research articles (2019–2023) on metal filters and MOF-polymer composites for flue gas filtration. While metal filters are already widely implemented in industrial systems, MOF-polymer composites remain at the research and development stage. Particular emphasis is placed on their filtration performance at high-temperature flue gas and assessment of their potential in combustion systems.
Flue gases generated by residential solid fuel combustion sources contain both particulate matter and gaseous pollutants. Their concentrations can be effectively reduced using emission control devices, which have traditionally been applied in small- and large-scale combustion sources. However, in residential combustion sources, such emission control devices remain unimplemented, except for electrostatic precipitators. This mini review provides a coherent summary of the current state of knowledge regarding emission control devices experimentally tested on residential combustion sources. It also outlines the technical and measurement challenges that must be addressed to enable effective, standards-compliant integration into residential combustion sources.