Water is a natural resource; its availability depends on climatic and geological conditions, and it is invariably controlled by human activities. Agbado-Ijaye lies within a coastal area, where local communities have been facing incessant water shortages, especially during the dry season. This study investigated the groundwater-bearing geological unit(s) using hydrogeophysical techniques in the coastal environment. The electrical resistivity technique, involving vertical electrical sounding (VES) and two-dimensional (2D) electrical resistivity imaging via Wenner array electrode configuration, was used to characterize the geoelectric distribution. Twenty VES stations were investigated and current electrodes (AB/2 m) spacing expanded from 1–200 m; four 2D electrical resistivity imaging traverses having a length of 200 m each and interelectrode spacing of 10 m (level 1) to 60 m (level 6) was adopted. Four geoelectric units were delineated, namely: topsoil (15–251 Ωm), clayey (28–100 Ωm), clayey sand (125–190 Ωm) and sandy (205–876 Ωm) with thicknesses ranging from 0.7–1.3 m, 4.1–19.0 m, 2.6–15.6 m and undefined depth, respectively. The 2D imaging sections also detected similar geoelectric layers, corroborating the VES-derived sections. The inverted sections delineated two different aquifers: the shallower low-yield aquifer comprising sandy clay/clayey sand units with a maximum depth of about 5.5 m. This layer is adjudged to be the continental plain sand of the Benin Formation. The deeper high-yield aquifer with a maximum depth of 30.4 m is a beach sand unit that belongs to the Tertiary Alluvium of the Dahomey Basin. The study showed that hydrogeophysical investigation is vital in exploring, developing, and managing coastal groundwater resources.
9 January 2024 in Sustainable Water Resources Management
Recent technology development has enabled the use of electric potential difference (EPD) in the telluric electric frequency selection method (TEFSM) geophysical approach for groundwater exploration. As a new approach, there is a need to build knowledge and experience in the application of the TEFSM geophysical approach in groundwater exploration in different hydrogeological settings. Hard rock granite aquifers are one of those aquifers where the TEFSM geophysical approach to exploring groundwater is yet to be investigated. In this study, a geophysical survey to identify four drilling sites for community boreholes was first conducted using the TEFSM approach. Vertical electrical profiles (VEP) of EPD up to 120 m per station were analyzed and interpreted to identify the depths of potential aquifers prior to drilling. The EPD VEP was then corroborated with borehole lithology data collected from the drilling to provide hydrogeophysical meaning to the data. The results show that groundwater occurs in the weathered granite layers. However, the water strikes appear to occur at the contact plane between the overlying weathered granite and the underlying fresh amphibolite. This suggests that the groundwater is stored in the weathered granite while the contact plane at fresh amphibolite is a preferential flow path. The granite aquifer at the study site is characterized by the EPD ranging from 0.018 to 0.068 mV. However, not all geological materials in this EPD range had water, some were just a reflection of weathering. The TEFSM geophysical approach was able to delineate layers of weathered granite aquifers and impermeable amphibolite based on low and high EPD contrasts, respectively. The findings assist in improving the practical understanding of the application of TEFSM to delineate aquifers and site boreholes in granite aquifers.