In this paper, a nonlinear dynamic model of a parallel shaft gear system consisting of two involute spur gears is developed to investigate the coupling effect between the gradual surface wear of gear teeth over time and nonlinear dynamic characteristics. A uniform wear model that accounts for how the volumetric wear of the gear teeth affect their meshing position, backlash, and stiffness is proposed. Additionally, a nonlinear dynamic model with six degrees of freedom is described that considers friction, time-varying gear backlash, and time-varying meshing stiffness. The proposed model significantly changes the mesh stiffness, not only in terms of value but also in terms of contact ratio. Furthermore, the nonlinear dynamic characteristics of the gear system vary significantly. It is found that the gradual wear of gear teeth affects the meshing position and further has a significant impact on the nonlinear dynamic characteristics of the spur gear system. This paper provides a basis for studying the nonlinear dynamic characteristics of the spur gear system as it experiences the gradual wear of teeth over time.
4 July 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
At present, the active control of gear vibration mostly relies on existing algorithms. In order to achieve effective vibration reduction of the gear system, particularly during the vibration process, this paper proposes a multi-channel VSMFxLMS algorithm based on the FxLMS algorithm. This novel approach takes into account the time-varying nature of the vibration signal during gear vibration. Adaptive filter power coefficients are updated in a skip-tongue variable-step manner using momentum factors. Firstly, the paper establishes the dynamics model of the gear system and analyzes the nonlinear dynamic characteristics of the system. It then examines the vibration damping effect of the FxLMS algorithm and analyzes its performance under different gear system motion states, considering different step lengths and momentum factors. Lastly, the proposed VSMFxLMS algorithm is compared with the FxLMS algorithm, highlighting the superiority of the former. Overall, this research highlights the potential of a multi-channel VSMFxLMS algorithm in reducing vibrations in gear systems. The study optimizes the performance of gear systems while using advanced control strategies.
13 September 2024 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
This paper introduces a metal rubber composite gear for gear vibration reduction. A comprehensive structural design calculation program is developed for the metal rubber composite gear pair. The design incorporates a gap between the tooth ring and the hub to accommodate thermal expansion and contraction, ensuring smooth transmission without jamming or seizing. The design process takes into consideration the compression and damping properties of the metal rubber material. A significant variable in the design process is the relative density of the metal rubber material. It is utilized to calculate the torsional stiffness, starting friction torque, and dynamic performance of the composite gear pair. To guide and optimize the design process, a nine-degree-of-freedom dynamic model is employed for dynamic analysis. The vibration reduction effect of the metal rubber composite gear is validated through numerical simulations and experimental testing. The results confirm the efficacy of the gear in reducing vibrations. This paper provides valuable insights and guidance for future designs focused on gear vibration reduction, paving the way for further advancements in this field.
31 August 2019 in Lecture Notes in Electrical Engineering