The delivery device is one of the key components in ensuring uniform grain spacing and achieving high-speed precision seeding. In this paper, a new type of high-speed airflow-assisted delivery device for maize is presented. The gas–solid flow in the delivery device was numerically studied by the coupling method of CFD and DEM. The influence of the structural parameters of the delivery device on the movement of the seeds and the airflow field was analyzed in detail. The matching relationship between the inlet-airflow velocity and the operating speed of the seeder was explored. The results show that the position of the intake seed chamber mainly affects the negative pressure in the distribution area of the mixing chamber. The increase in the shrinkage angle results in the decrease in pressure loss and the decrease in airflow velocity in the delivery chamber. As the diffusion angle increases, the airflow forms a stable straight jet flow and the airflow velocity in the delivery chamber increases. As the ejection angle increases, the bouncing degree of the seed decreases, thereby ensuring the consistency of the seed-ejection direction. The research results show that, when the intake seed chamber is located in the middle, the shrinkage angle is 70°, the diffusion angle is 30°, and the exit angle is 60°, the air-assisted delivery device has better performance. With the increase in inlet wind speed, the seed-ejection speed can also be increased according to a certain proportion, which can meet the requirements of zero-speed seeding and ensure the uniformity of seed spacing, providing a new seed delivery scheme. In the future, if invasive damage to the seed shell is guaranteed to be minimized in high-speed airflow, the new delivery device can meet the requirements of precision seeding under high-speed conditions.

In order to elucidate the impact of pressurized tubes’ structures on the sowing performance of pneumatic seed delivery systems, the EDEM–CFD coupled simulation method was employed to analyze the influence of pressurized tube parameters, including length (L), corrugation depth (S), corrugation width (K), and the number of corrugations, on seed movement characteristics, distribution uniformity, and airflow patterns. Simulation-validated experiments were conducted to study the impact of the optimal pressurized tube structure on seeding performance. The results indicate that pressurized tubes significantly enhance the uniformity coefficient of seed distribution, reduce seed velocity, and decrease the coefficient of variation in distribution uniformity. When pressurized tube parameters, specifically length (L), corrugation depth (S), corrugation width (K), and the number of corrugations, are set at 800 mm, 8 mm, 50 mm, and 6, respectively, the uniformity coefficient of seed distribution exceeds 95%, and the coefficient of variation in seed discharge consistency for each row is less than 3.2%. Moreover, the seed velocity at the outlet of the pressurized tube, the relative velocity of two-phase flow, and pressure loss are all minimal, indicating superior seeding performance. This research provides valuable insights into the analysis of seed movement characteristics within pressurized tubes and the optimization of their structural parameters.