Jonh Ramón

Dr. Jonh Ramón


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
SGSneyder Gaona
Sneyder Gaona
JRJonh Ramón
Jonh Ramón
Eduardo ValarezoEduardo Valarezo
Eduardo Valarezo
In this study, GP (geopolymer) and GTA (geopolymer/ZnTiO3/TiO2) geopolymeric materials were prepared from metakaolin (MK) and characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), energy dispersive X-rays (EDX), specific surface area (SSA), and point of zero charge (PZC). The adsorption capacity and photocatalytic activity of the compounds prepared in the form of pellets was determined by degradation of the methylene blue (MB) dye in batch reactors, at pH = 7.0 ± 0.2 and room temperature (20 °C). The results indicate that both compounds are highly efficient at adsorbing MB, with an average efficiency value of 98.5%. The Langmuir isotherm model and the pseudo second order kinetic model provided the best fits to the experimental data for both compounds. In the MB photodegradation experiments under UVB irradiation, GTA reached an efficiency of 93%, being higher than that achieved by GP (4%). Therefore, the incorporation of ZnTiO3/TiO2 in the geopolymeric matrix allowed GTA to achieve higher overall efficiency, by combining adsorption and photocatalysis, compared to the GP compound. The results indicate that the synthesized compounds could be used for up to five consecutive cycles for the removal of MB from wastewater through adsorption and/or photocatalysis processes.

10 September 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
GCGuisella Cuenca
Guisella Cuenca
JRJonh Ramón
Jonh Ramón
Theoretically, lanthanum can bond with surface oxygens of ZnTiO3 to form La-O-Ti bonds, resulting in the change of both the band structure and the electron state of the surface. To verify this statement, DFT calculations were performed using a model with a dispersed lanthanum atom on the surface (101) of ZnTiO3. The negative heat segmentation values obtained suggest that the incorporation of La on the surface of ZnTiO3 is thermodynamically stable. The bandgap energy value of La/ZnTiO3 (2.92 eV) was lower than that of ZnTiO3 (3.16 eV). TDOS showed that the conduction band (CB) and the valence band (VB) energy levels of La/ZnTiO3 are denser than those of ZnTiO3 due to the participation of hybrid levels composed mainly of O2p and La5d orbitals. From the PDOSs, Bader’s charge analysis, and ELF function, it was established that the La-O bond is polar covalent. MB adsorption on La/ZnTiO3 (−200 kJ/mol) was more favorable than on ZnTiO3 (−85 kJ/mol). From the evidence of this study, it is proposed that the MB molecule first is adsorbed on the surface of La/ZnTiO3, and then the electrons in the VB of La/ZnTiO3 are photoexcited to hybrid levels, and finally, the MB molecule oxidizes into smaller molecules.

Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
JRJonh Ramón
Jonh Ramón
Eduardo ValarezoEduardo Valarezo
Eduardo Valarezo
Cyanide is a highly toxic substance present in wastewater from various industries. This study investigates the removal of cyanide species (CS) from aqueous solutions using the ZnTiO3/TiO2/H2O2/UVB system. ZnTiO3/TiO2 nanoparticles synthesized by the sol-gel method were characterized by powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS). The adsorption capacity of nanoparticles was tested by varying the pH of the solution, adsorbent concentration, and contact time. The adsorption of CS on ZnTiO3 and TiO2 surfaces was verified by Density Functional Theory (DFT) calculations. Photocatalytic experiments were achieved under UVB irradiation (λ = 310 nm). The response surface methodology (RSM) was used to optimize the CS removal efficiency. The detoxification effect was evaluated by acute toxicity tests with brine shrimp. The theoretical results show that the adsorption of CS is energetically more favorable on the ZnTiO3 surface than on the TiO2 surface. The experimental results show that the system consisting of ZnTiO3/TiO2 (200 mg L−1), H2O2 (0.1%), and UVB light removes 99% of CS from aqueous solutions after 60 min and reduces the mortality of nauplii in 90% after 90 min. This system was reused in five consecutive cycles with a total loss of efficiency of 30%.

Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
GCGuisella Cuenca
Guisella Cuenca
JRJonh Ramón
Jonh Ramón
Cyanide is a highly toxic compound that can pose serious health problems to both humans and aquatic organisms. Therefore, the present comparative study focuses on the removal of total cyanide from aqueous solutions by photocatalytic adsorption and degradation methods using ZnTiO3 (ZTO), La/ZnTiO3 (La/ZTO), and Ce/ZnTiO3 (Ce/ZTO). The nanoparticles were synthesized by the sol-gel method and characterized by X-ray powder diffractometry (XRD), Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), Diffuse reflectance spectroscopy (DRS), and Specific surface area (SSA). The adsorption equilibrium data were fitted to the Langmuir and Freundlich isotherm models. Adsorption kinetics were also evaluated using the pseudo-first-order and pseudo-second-order models and the intraparticle diffusion model. Likewise, the photodegradation of cyanide under simulated sunlight was investigated and the reusability of the synthesized nanoparticles for cyanide removal in aqueous systems was determined. The results demonstrated the effectiveness of doping with lanthanum (La) and cerium (Ce) to improve the adsorbent and photocatalytic properties of ZTO. In general, La/ZTO showed the maximum percentage of total cyanide removal (99.0%) followed by Ce/ZTO (97.0%) and ZTO (93.6%). Finally, based on the evidence of this study, a mechanism for the removal of total cyanide from aqueous solutions using the synthesized nanoparticles was proposed.

29 March 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
JCJuan-Pablo Cueva
Juan-Pablo Cueva
JRJonh Ramón
Jonh Ramón
Eduardo ValarezoEduardo Valarezo
Eduardo Valarezo
Hybrid nanomaterials integrating magnetic and semiconductor phases offer promising multifunctional platforms for wastewater remediation; however, their stabilization and recovery remain challenging. In this study, Fe3O4 and ZnTiO3/TiO2 nanoparticles were incorporated into a rice husk ash-based geopolymer matrix to develop hybrid nanocomposites for synergistic adsorption–photodegradation of methylene blue (MB) and methyl orange (MO). The materials were synthesized via alkaline activation followed by nanoparticle incorporation, and characterized by XRD, XRF, FTIR, SEM, EDX, BET surface area analysis, and pHPZC determination. XRD confirmed the presence of nanocrystalline Fe3O4 and ZnTiO3/TiO2 phases while preserving the amorphous aluminosilicate framework. Modified powders exhibited higher specific surface areas (up to 198 m2 g−1) compared to the unmodified geopolymer. Adsorption followed the Langmuir isotherm and pseudo-second-order kinetics, with spontaneous and exothermic behavior. Under UV irradiation, the ZnTiO3/TiO2-modified composite achieved photodegradation efficiencies up to 94% for MB and 92% for MO, whereas the Fe3O4-modified material combined adsorption capacity with magnetic recoverability. These results demonstrate that nanoparticle incorporation enables multifunctional performance while maintaining structural integrity of the geopolymeric matrix.

18 September 2026 in Molecules
Verified
Journal Article
Open access
PDF file
Ximena Jaramillo-FierroXimena Jaramillo-Fierro
Ximena Jaramillo-Fierro
EAElias Adrew Aguilar
Elias Adrew Aguilar
JRJonh Ramón
Jonh Ramón
DCDarío Cruz
Darío Cruz
Dye-sensitized solar cells (DSSCs) using natural pigments offer a low-cost, non-toxic alternative to ruthenium dyes, but fungal sensitizers remain underexplored relative to plant-derived pigments. This study reports, for the first time, the phenoxazine pigments cinnabarin and cinnabaric acid from Pycnoporus sanguineus extract (PSE) as DSSC sensitizers, paired with a ZnTiO3/TiO2 heterojunction photoanode designed to suppress interfacial recombination. The extract was characterized by HPLC-DAD and FTIR, and the semiconductors ZnTiO3/TiO2 (ZTO) and TiO2 (TO) by XRD and SEM. Four device configurations (TO, PSE/TO, ZTO/TO, PSE/ZTO/TO) were evaluated photovoltaically and compared statistically (ANOVA, Tukey/Duncan), while DFT calculations (Gaussian, VASP) modeled dye electronic structure, band-edge alignment, and surface adsorption. Efficiency increased significantly across all configurations, from 0.06% (TO) to 0.38% (PSE/ZTO/TO). Band-alignment calculations revealed a thermodynamically favorable injection pathway from the dyes into ZnTiO3, with TiO2 acting as a unidirectional barrier against backtransfer, consistent with the dye-independent increase in open-circuit voltage observed experimentally. Adsorption modeling revealed a shared vertical anchoring geometry with differentiated surface selectivity between the two dyes. These results establish P. sanguineus phenoxazines as a competitive, mechanistically characterized addition to the limited catalog of fungal DSSC sensitizers and support ZnTiO3/TiO2 heterostructure engineering as a key strategy for improving fungal-pigment DSSC performance.