Freeze–thaw failure of frozen rock slope often occurs during engineering construction and mining in cold area, which poses a great threat to engineering construction and people's life safety. The properties of rock mass in cold region will change with the periodic change of temperature, which makes it difficult to accurately evaluate the stability of slope under the action of freeze–thaw cycle by conventional methods. Based on field investigation and literature review, this paper discusses the characteristics of frozen rock mass and the failure mechanism of frozen rock slope, and gives the types and failure modes of frozen rock slope. Then, the research status of frozen rock slope is analyzed. It is pointed out that the failure of frozen rock slope is the result of thermo-hydro-mechanical (THM) coupling. It is considered that freeze–thaw cycle, rainfall infiltration and fracture propagation have significant effects on the stability of frozen rock slope, and numerical simulation is used to demonstrate. The research shows that the safety factor of frozen rock slope changes dynamically with the surface temperature, and the safety factor of slope decreases year by year with the increase of freeze–thaw cycles, and the fracture expansion will significantly reduce the safety factor. Based on the above knowledge, a time-varying evaluation method of frozen rock slope stability based on THM coupling theory is proposed. This paper can deepen scholars' understanding of rock fracture slope in cold area and promote related research work.
5 January 2024 in Rock Mechanics and Rock Engineering
The freezing damage of rock tunnels in cold region involves ice-water phase change and complicated interaction of Thermo–Hydro–Mechanical (THM) field. Taking the fractured rock mass of cold region tunnels as research subject, the THM coupling model of cold region tunnels was established, which is based on the seepage mechanics, heat transfer theory, damage mechanics and equivalent continuum theory. This model could reflect the anisotropic properties of deformation, water migration and heat transfer caused by the initial fracture of rock mass. The construction and operation processes of a rock tunnel in cold region were simulated, and results were compared with the measured value and predecessor’s achievements. It shows that proposed model could reflect the anisotropic property of surrounding rock and the simulated deformation and stress are not symmetrical. Compared with the literature, the calculated results in this paper are closer to the measured values. The insulating layer has a significant effect on the stress of the supporting structures. The maximum tension stress of the lining is 4.5 times as that without insulating layer, and the lining will be destroyed for the overlarge tension stress.
1 January 2020 in Advances in Materials Science and Engineering
To analytically describe the internal stress in a fill mass made of granular man‐made material (cemented paste backfill, CPB), a new 3D effective stress model is developed. The developed model integrates Bishop effective stress principle, water retention relationship, and arching effect. All model parameters are determined from measurable experimental data. The uncertainties of the model parameters are examined by sensitivity analysis. A series of model application is conducted to investigate the effects of field conditions on the internal stress in CPB. The obtained results show that the proposed model is able to capture the influence of operation time, stope geometry, and rock/CPB interface properties on the effective stress in CPB. Hence, the developed model can be used as a useful tool for the optimal design of CPB structure.