In this paper, a new compact dual-band bandpass filter (DB-BPF) is proposed using parallel coupled lines. The design method is based on introducing transmission zeros (TZs) in the frequency response of a single-wideband filter. In the proposed structure, three coupled lines and a multi-mode resonator are used to realize the wide bandpass filter. Meanwhile, two coupled lines that are connected at the end and loaded by an open-circuit stub are employed to make a new notch filter. The proposed DB-BPF is designed and fabricated on Rogers RO3210 substrate for Wireless Local Area Networks (WLANs) applications. The simulation results show good agreement with measurements. The measured results exhibit two passbands centered at 2.4 and 5.2 GHz, having an insertion loss of less than 0.1 dB and 0.9 dB, respectively. Low insertion loss, compact size, and high attenuation between two passbands are the main advantages of the proposed DB-BPF.
D Flip-Flop as a digital circuit can be used as a timing element in many sophisticated circuits. Therefore the optimum performance with the lowest power consumption and acceptable delay time will be critical issue in electronics circuits. The newly proposed Dual-Edge Triggered Static D Flip-Flop circuit layout is defined as a multi-objective optimization problem. For this, an optimum fuzzy inference system with fuzzy rules is proposed to enhance the performance and convergence of non-dominated sorting Genetic Algorithm-II by adaptive control of the exploration and exploitation parameters. By using proposed Fuzzy NSGA-II algorithm, the more optimum values for MOSFET channel widths and power supply are discovered in search space than ordinary NSGA types. What is more, the design parameters involving NMOS and PMOS channel widths and power supply voltage and the performance parameters including average power consumption and propagation delay time are linked. To do this, the required mathematical backgrounds are presented in this study. The optimum values for the design parameters of MOSFETs channel widths and power supply are discovered. Based on them the power delay product quantity (PDP) is 6.32 PJ at 125 MHz Clock Frequency, L = 0.18 µm, and T = 27 °C.