Emin YILDIRIZ

Dr. Emin YILDIRIZ

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 July 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
EYEmin YILDIRIZ
Emin YILDIRIZ
MGM. Gulec
M. Gulec
MAM. Aydin
M. Aydin
In this paper, a novel dual-rotor axial-gap flux-switching permanent-magnet machine with dc excitation winding is proposed. First, the topology and operation principles of the proposed topology are clarified. Basic design equations and parameters are provided, and the electromagnetic analyses of the proposed flux-switching machine with 3-D FEA are performed. Parametric optimizations using 3-D FEA are completed for different dc excitations. A prototype machine is manufactured, tested, and validated. It is shown that the air-gap flux of the proposed axial-gap machine can be controlled in a wide range compared to conventional surface magnet machines.

1 August 2017 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
EYEmin YILDIRIZ
Emin YILDIRIZ
GÖGüven Önbilgin
Güven Önbilgin
Hybrid excitation synchronous machines (HESMs) are permanent magnet machines which allow the control of the air‐gap flux density. In this study, three new axial field HESM structures, each having two rotors and one stator, are proposed. The operation principles of these machines, considering weakening or supporting the air‐gap flux density, are described. The magnetostatic and transient analyses of the proposed models have been carried out by using finite element method. To have reliable analysis results, the stator length and input and output diameters of the models have been chosen to be identical. Results are compared in terms of efficiency, power density and range of flux control between each other and another axial field HESM in the literature. In conclusion, the proposed HESM models demonstrate satisfactory performance for the generator mode and they are suitable for wind energy applications. Furthermore, because of their field weakening operation ability they can be used as motors in the vehicle industry.

1 November 2018
Verified
Conference Paper
Closed access
EAEmrullah Aydin
Emrullah Aydin
YKYusuf Kosesoy
Yusuf Kosesoy
EYEmin YILDIRIZ
Emin YILDIRIZ
MAM. Timur Aydemir
M. Timur Aydemir
The interest in electric vehicles is increasing day by day due to the reduction of fossil fuel resources and the environmental pollution caused by the use of these resources. Increased attention to electrical vehicles has also led the way to search for more practical and reliable methods to use them. Wireless power transfer (WPT) is also receiving attention for several applications and it is viewed as the choice of battery charging systems for near future. In this study, the coupling coefficients of different coil structures with equal winding area are compared. Taking into consideration the obtained results, a 2.2 kW WPT system to charge has been designed with square and hexagonal coil and its Finite Element Analysis (FEA) simulation has been carried out by using Maxwell Ansys. Simulation results show, hexagonal coil shape is less sensitive to misalignment conditions and is a good candidate for EV applications.

1 November 2013
Verified
Conference Paper
Closed access
EYEmin YILDIRIZ
Emin YILDIRIZ
GÖGüven Önbi̇lgi̇n
Güven Önbi̇lgi̇n
Air gap flux of Hybrid Excitation Synchronous Machine (HESM) is provided by a combination of permanent magnet and excitation winding MMFs. Thus flux weakening or flux boosting can easily be achieved. HESM can be series or parallel double excited. Many models have been proposed for radial flux HESM structure in literature. However, axial flux machines have some characteristics such as high efficiency, high power/torque density, low noise and vibration. In this study, a novel Axial Flux Hybrid Excitation Synchronous Machine (AFHESM) with magnetic bridge is proposed. The structure and operation principle of the AFHESM are described. No-load and load operation of a 3D generator mode is investigated by Finite Element Method.

2 August 2019 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
EYEmin YILDIRIZ
Emin YILDIRIZ
SKSalih Burak Kemer
Salih Burak Kemer
Accurate and fast calculation of the self and mutual inductance of coils is an important factor in system design and optimization for many applications. The methods of calculation mutual inductance between two spiral disk coils include elliptic integral solutions and coefficients in literature. In this study, a new semi‐analytical method is proposed to calculate the mutual inductance between two thin disk coils without any coefficient and complex integral solutions. For this purpose, the circular winding is treated as polygonal winding with multiple edges. Unlike Grover's average diameter approach, the gaps between the turns of the coils and the diameter of the wire are included in the calculation. To observe the reliability of the method developed here, the mutual inductance between identical disk coils with an inner diameter of 10 and 20 cm were calculated using both methods. To confirm the accuracy of the proposed method, the experimental results are compared with two methods using the same coils. It is observed that the new method gives acceptable results (maximum error of 2.83%) especially at the distances equals to the inner radius. Consequently; this method is useful for the design of loosely coupled systems, such as wireless power transfer and pressure sensors.

1 April 2019
Verified
Conference Paper
Closed access
YKYusuf Kosesoy
Yusuf Kosesoy
EAEmrullah Aydin
Emrullah Aydin
EYEmin YILDIRIZ
Emin YILDIRIZ
MAMehmet Timur Aydemir
Mehmet Timur Aydemir
Electric vehicles are seen as an alternative option in response to the depletion of resources. In order to increase the use of EVs in daily life, practical and reliable methods to charge batteries of EVs are quite important, accordingly wireless power transfer (WPT) is considered as a solution to charge batteries. In this study, a system which has 1 kW power rating and 20 kHz operation frequency is designed and implemented. Finite Element Analysis (FEA) simulation that verifies the coil design and inductance calculation has been carried out by using ANSYS Maxwell software. Waveforms of power parameters are obtained. Power loss at each stage and the efficiency of overall system are determined and interpreted.