This paper deals with the issue of monitoring the spatial distribution of bulk electrical conductivity, σ_b, in the soil root zone by using electromagnetic induction (EMI) sensors under different water and salinity conditions. To deduce the actual distribution of depth-specific σ_b from EMI apparent electrical conductivity (EC_a) measurements, we inverted the data by using a regularized 1-D inversion procedure designed to manage nonlinear multiple EMI-depth responses. The inversion technique is based on the coupling of the damped Gauss–Newton method with truncated generalized singular value decomposition (TGSVD). The ill-posedness of the EMI data inversion is addressed by using a sharp stabilizer term in the objective function. This specific stabilizer promotes the reconstruction of blocky targets, thereby contributing to enhance the spatial resolution of the EMI results in the presence of sharp boundaries (otherwise smeared out after the application of more standard Occam-like regularization strategies searching for smooth solutions). Time-domain reflectometry (TDR) data are used as ground-truth data for calibration of the inversion results. An experimental field was divided into four transects 30 m long and 2.8 m wide, cultivated with green bean, and irrigated with water at two different salinity levels and using two different irrigation volumes. Clearly, this induces different salinity and water contents within the soil profiles. For each transect, 26 regularly spaced monitoring soundings (1 m apart) were selected for the collection of (i) Geonics EM-38 and (ii) Tektronix reflectometer data. Despite the original discrepancies in the EMI and TDR data, we found a significant correlation of the means and standard deviations of the two data series; in particular, after a low-pass spatial filtering of the TDR data. Based on these findings, this paper introduces a novel methodology to calibrate EMI-based electrical conductivities via TDR direct measurements. This calibration strategy consists of a linear mapping of the original inversion results into a new conductivity spatial distribution with the coefficients of the transformation uniquely based on the statistics of the two original measurement datasets (EMI and TDR conductivities).

Zeolites can be extensively employed in agricultural activities because they improve soil properties such as infiltration rates, saturated hydraulic conductivity, water holding capacity, and cation exchange capacity. Natural and synthetic zeolites can efficiently hold water. Zeolites are also believed to have the ability to lose and gain water reversibly, without changing their crystal structure. In the present study, several laboratory tests were carried out using: (i) zeolite synthesized from coal fly ash (a waste product from burning coal in thermoelectric power plants), (ii) a silty loam soil, typically found in Southern Italy, and (iii) sunflower as a reference plant. The selected soil was amended with different percentages of zeolite (1, 2, 5, and 10%) and the effects of the synthetic mineral addition on the hydrophysical properties of the soil and plant growth were evaluated. The results indicated that soil–zeolite mixtures retained water more efficiently by pore radius modification. However, this causes a variation in the range of plant-available water towards higher soil humidity values, as the amount of added zeolite increases. These data confirm that zeolite addition modifies the selected hydrophysical properties of the soil with the effect of decreasing the soil drainage capacity, making the soil less habitable for plant growth.

This paper mainly aims to illustrate an irrigation management tool to simulate scheduling of district-level water needs over the course of an irrigation season. The tool is mostly based on a daily model for simulating flow of water (and solutes) in heterogeneous agri-environmental systems (called FLOWS-HAGES). The model produces information on the daily evolution of: soil water contents and pressure potentials in the soil profile; water uptake and actual evapotranspiration; stress periods for each crop; return fluxes to the groundwater and their quality in terms of solute concentrations (e.g., nitrates). FLOWS-HAGES provides a daily list of hydrants to be operated according to water or crop-based criteria. The daily optimal sequence of hydrant use may thus be established by passing the volumes to be delivered on to the model for simulating the hydraulics of the irrigation network, in order to ensure that the discharges flowing inside the network of distribution pipes are delivered under optimal pressure head distribution in the system. All the above evaluations can be carried out in a stochastic framework to account for soil heterogeneity and climate changes. To illustrate the potential of FLOWS-HAGES, a case study was considered for a selected sector of the Irrigation District 10 in the “Sinistra Ofanto” irrigation system (southern Italy, Apulia region). In a 139 ha area (Sector 6 of the Irrigation District), soil profiles were analyzed for characterization of hydraulic properties variability. Hydraulic properties were determined by a combination of field and laboratory measurements. Model simulations were validated by comparing soil water storage simulated and measured by a sensor based on electromagnetic induction technique. Irrigation water volumes and frequency calculated by the model were compared to the volumes actually supplied by the farmers. Compared to the farmers behavior, the model simulates more frequent irrigations with lower irrigation volumes. Finally, some indexes of irrigation performance were calculated for each farm under study. The resulting maps provide useful information on the spatial distribution of farmer behavior, indicating the abuse or underuse of water as well as the fraction of the water lost by drainage following the irrigation method applied.

Unsaturated hydraulic properties and their spatial variability today are analyzed in order to use properly mathematical models developed to simulate flow of the water and solute movement at the field-scale soils. Many studies have shown that observations of soil hydraulic properties should not be considered purely random, given that they possess a structure which may be described by means of stochastic processes. The techniques used for analyzing such a structure have essentially been based either on the theory of regionalized variables or to a lesser extent, on the analysis of time series. This work attempts to use the time-series approach mentioned above by means of a study of pressure head h and water content θ which characterize soil water status, in the space-time domain. The data of the analyses were recorded in the open field during a controlled drainage process, evaporation being prevented, along a 50 m transect in a volcanic Vesuvian soil. The isotropic hypothesis is empirical proved and then the autocorrelation ACF and the partial autocorrelation functions PACF were used to identify and estimate the ARMA(1,1) statistical model for the analyzed series and the AR(1) for the extracted signal. Relations with a state-space model are investigated, and a bivariate AR(1) model fitted. The simultaneous relations between θ and h are considered and estimated. The results are of value for sampling strategies and they should incite to a larger use of time and space series analysis.

Soil water content (θ), matric potential (h) and hydraulic conductivity (K) are key parameters for hydrological and environmental processes. Several sensors have been developed for measuring soil θ–h–K relationships. The cost of such commercially available sensors may vary over several orders of magnitude. In recent years, some sensors have been designed in the framework of Internet of Things (i.e., IoT) systems to make remote real-time soil data acquisition more straightforward, enabling low-cost field-scale monitoring at high spatio-temporal scales. In this paper, we introduce a new multi-parameter sensor designed for the simultaneous estimation of θ and h at different soil depths and, due to the sensor’s specific layout, the soil hydraulic conductivity function via the instantaneous profile method (IPM). Our findings indicate that a second-order polynomial function is the most suitable model (R² = 0.99) for capturing the behavior of the capacitive-based sensor in estimating θ in the examined soil, which has a silty-loam texture. The effectiveness of low-cost capacitive sensors, coupled with the IPM method, was confirmed as a viable alternative to time domain reflectometry (TDR) probes. Notably, the layout of the sensor makes the IPM method less labor-intensive to implement. The proposed monitoring system consistently demonstrated robust performance throughout extended periods of data acquisition and is highly suitable for ongoing monitoring of soil water status.