A waveguide-based microwave plasma system was built using a resonant cavity and a quartz tube. 2.45 GHz 850 W magnetron was used to obtain helium discharge without an igniter. The temporal images of discharge were recorded on microsecond time scales using an intensified charge-coupled device camera. The excitation temperature was calculated as 3385 K using the helium lines, which were obtained from emission spectrum of the discharge. The gas temperature was measured as 1208 K by a thermocouple.
1 May 2014 in Journal of Macromolecular Science, Part A
The paper presents the results of the research on a new polymer-membrane and gel electrolytes for electrochromic devices. A complementary solid-state electrochromic device consisting of cathodically coloring working electrode of WO3 and anodically coloring counter electrode of NiO films is prepared to compare the effects of gel or membrane forms of carboxymethyl cellulose (CMC) polymer electrolyte on the electrochromic properties of devices. The performance evaluations of the complementary solid-state electrochromic devices indicate good reversibility, low power consumption of ±3 V in colored state, high variation of transmittance changing of 64% in gel electrolyte, and lower 7% in membrane electrolyte and good memory effect under open-circuit conditions. CMC based electrolytes can be used as an ion-conducting medium and be a good candidate for complementary electrochromic devices owing to, the improved properties as well as its cheapness.