Antibiotics are extensively applied in the pharmaceutical industry, while posing a tremendous hazard to the ecosystem and human health. In this study, the degradation performance of ciprofloxacin (CIP), one of the typical contaminants of antibiotics, in an oxidation system of peroxymonosulfate (PMS) activated by magnetic graphene oxide (MGO) was investigated. The effects of the MGO dosage, PMS concentration and pH on the degradation of CIP were evaluated, and under the optimal treatment conditions, the CIP degradation rate was up to 96.5% with a TOC removal rate of 63.4%. A kinetic model of pseudo-secondary adsorption indicated that it involves an adsorption process with progressively intensified chemical reactions. Furthermore, the MGO exhibited excellent recyclability and stability, maintaining strong catalytic activity after three regenerative cycles, with a CIP removal rate of 87.0%. EPR and LC-MS experiments suggested that •OH and SO4−• generated in the MGO/PMS system served as the main reactants contributing to the decomposition of the CIP, whereby the CIP molecule was effectively destroyed to produce other organic intermediates. Results of this study indicate that organic pollutants in the aqueous environment can be effectively removed in the MGO/PMS system, in which MGO has excellent catalytic activity and stabilization for being recycled to avoid secondary pollution, with definite research value and application prospects in the field of water treatment.
1 August 2021 in Journal of Water Process Engineering
The feasibility of using gas phase surface discharge with microporous bubbling combined with g-C3N4 photocatalysis for the degradation of pharmaceutical contaminants was evaluated.
The microbubble pretreated resin was used for demulsification and deoiling of the simulated O/W emulsion. The demulsification and deoiling performance and the influencing factors were investigated systematically. Experimental results indicate that the microbubble pretreated resin reaches a 97% oil removal within 80 min; on the contrary, oil removals are 90% and 85% for NaOH solution soaked and un-pretreated resins respectively. After five repeated runs, the oil removal of microbubble pretreated resin can be maintained at over 70%. The demulsification mechanism was revealed by comparing zeta potential, surface tension, contact angle of the emulsion in treatment, and the characterization results of the resin before and after use. Three possible pathways of demulsification were concluded and the ranking contributions can be shown below. Pathway 1: Competitive trapping of surfactant. The cationic groups of the resin combine with the anionic groups of the surfactant and drag them away from the oil particle surface. Pathway 2: Distribution equilibrium of surfactant. Free surfactants in the emulsion are captured by resin and reduce the concentration of uncombined surfactant. This results in surfactants on the oil particle partly detaching from the oil surface to maintain the adsorption-desorption equilibrium of the surfactant. Pathway 3: Adsorption coalescence.