Low-temperature NH3-SCR is an efficient technology for NOx removal from flue gas. The carbon-based catalyst designed by using porous carbon material with great specific surface area and interconnected pores as the support to load the active components shows excellent NH3-SCR performance and has a broad application prospect. However, overcoming the poor resistance of H2O and SO2 poisoning for carbon-based catalysts remains a great challenge. Notably, reviews on the sulfur and water resistance of carbon-based low-temperature NH3-SCR catalysts have not been previously reported to the best of our knowledge. This review introduces the reaction mechanism of the NH3-SCR process and the poisoning mechanism of SO2 and H2O to carbon-based catalysts. Strategies to improve the SO2 and H2O resistance of carbon-based catalysts in recent years are summarized through the effect of support, modification, structure control, preparation methods and reaction conditions. Perspective for the further development of carbon-based catalysts in NOx low-temperature SCR is proposed. This study provides a new insight and guidance into the design of low-temperature SCR catalysts resistant to SO2 and H2O in the future.
The effect of H2 activation on the performance of CuFeOx catalyst for low-temperature CO oxidation was investigated. The characterizations of XRD, XPS, H2-TPR, O2-TPD, and in situ DRIFTS were employed to establish the relationship between physicochemical property and catalytic activity. The results showed that the CuFeOx catalyst activated with H2 at 100 °C displayed higher performance, which achieved 99.6% CO conversion at 175 °C. In addition, the H2 activation promoted the generation of Fe2+ species, and more oxygen vacancy could be formation with higher concentration of Oα species, which improved the migration rate of oxygen species in the reaction process. Furthermore, the reducibility of the catalyst was enhanced significantly, which increased the low-temperature activity. Moreover, the in situ DRIFTS experiments revealed that the reaction pathway of CO oxidation followed MvK mechanism at low temperature (<175 °C), and both MvK and L-H mechanism was involved at high temperature. The Cu+-CO and carbonate species were the main reactive intermediates, and the H2 activation increased the concentration of Cu+ species and accelerated the decomposition carbonate species, thus improving the catalytic performance effectively.
In this paper, the effect of KMnO4 modification on the performance of CO oxidation over a CuCeOx/Fe2O3 catalyst in industrial flue gas was studied. X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature-programmed reduction by H2 (H2-TPR), Fourier transform infrared spectroscope (FTIR), and Raman spectra were employed to reveal the relationship between the structural properties and the performance of the catalyst. The results show that the catalytic activity could be increased by KMnO4 modification. CuCeOx/Fe2O3 modified with 0.07 mol/L KMnO4 exhibited high activity, with a CO conversion of 78.2% at 160 °C. The modification of KMnO4 reduced the grain size and promoted the uniform dispersion of active particles. In addition, the number of oxygen-containing functional groups increased, which could anchor metal particles and provide active oxygen species for CO oxidation.
To reveal the effect of vanadium content on the viscous flow behavior of vanadium-containing hot metal, viscosity measurements and molecular dynamics simulations were conducted. The viscosity and melting characteristic temperature were measured. The local structures of Fe, V, and C atoms were analyzed using radial distribution functions, average coordination numbers, mean square displacements, and cluster evolution. Both viscosity and melting characteristic temperature increased with vanadium content. At 1300 °C, the viscosity increased from 11.8 to 19.9 mPa·s as the vanadium content increased from 0.20 to 0.30 wt%. The melting characteristic temperature increased from 1242 to 1323 °C. Structural analysis showed that increasing vanadium content promoted the redistribution of C atoms. The average coordination number of V–C increased from 7.780 to 8.218. In contrast, the coordination numbers of C–Fe and Fe–C decreased. The mean square displacements of Fe and C atoms also decreased, indicating that atomic diffusion was suppressed. Cluster evolution further showed that V–C structures could dissociate and recombine with Fe–C and Fe–V units. Therefore, increasing vanadium content reduced the fluidity of hot metal by increasing the melting characteristic temperature, strengthening V–C local coordination, and promoting complex cluster formation.