La inteligencia artificial (IA) está transformando el sector agroindustrial al facilitar tareas como la predicción del clima, la detección de plagas y enfermedades, y la optimización del uso de agua y fertilizantes. Estas aplicaciones no solo aumentan la eficiencia y sostenibilidad de los sistemas agrícolas, sino que también mejoran la productividad y la resiliencia frente al cambio climático. Este trabajo realiza una revisión sistemática sobre el uso de IA en la producción de café, analizando estudios encontrados en bases de datos reconocidas como Scopus, Web of Science, IEEE Xplore y Google Scholar. La búsqueda incluyó combinaciones de palabras como, "café" AND "machine learning", "inteligencia artificial" AND "agricultura de precisión", "detección de plagas" OR "redes neuronales", AND "sostenibilidad". Inicialmente se identificaron 452 artículos, de los cuales 85 cumplieron con los criterios de inclusión tras un riguroso proceso de selección y exclusión. La revisión identificó que las aplicaciones de IA en la producción cafetera se enfocan principalmente en la detección temprana de enfermedades como la roya del café mediante visión por computadora y redes neuronales convolucionales, la optimización de sistemas de riego inteligentes que integran sensores y algoritmos para reducir el consumo de agua hasta en un 20%, y el uso de robótica agrícola para mejorar la eficiencia operativa y disminuir la dependencia de mano de obra. Las tecnologías, además, fomentan prácticas más sostenibles y mejoran la trazabilidad en la cadena de suministro del café. Los resultados de esta revisión arrojan luces sobre cómo las técnicas de IA pueden optimizar la producción cafetera y contribuir al desarrollo de sistemas agrícolas más eficientes y sostenibles. Este trabajo ofrece un marco de referencia que puede ser útil para orientar investigaciones futuras y guiar a los productores hacia prácticas resilientes frente al cambio climático y las crecientes demandas de sostenibilidad.
A computational fluid dynamics study of the horizontal oil–water flow was performed using the Eulerian–Eulerian and mixture multiphase models in conjunction with the realizable k–ε turbulence model for the characterization of flow patterns. The experimental tests were carried out using water and mineral oil with a density of 880 kg/m3 and a viscosity of 180 cP, varying the superficial velocities of both fluids in ranges of 0.1–1.2 m/s and 0.1–0.5 m/s, respectively. The numerical model was defined under the same initial and boundary conditions as in the experiment. Moreover, the model is defined such that entering the fluids in a mixed state, the stratified pattern could form adequately with the two multiphase models. Although the Eulerian–Eulerian model, together with the geometric reconstruction scheme, allowed us to visualize the three-dimensional dispersed patterns in a very similar way to the experimental results, the mixture model did not exhibit such similarity, especially in the oil-in-water dispersions. Additionally, the Eulerian–Eulerian model was able to predict the experimental holdup values with an average error of 15.2%.
The oil and gas sector has recently shown an interest in hydrodynamic cavitation for oil enhancement, as it allows reducing transportation and refinement costs. This work presents a fluid-dynamic study of Colombian oil at different temperatures passing through a vortex reactor. First, an experimental design was elaborated, establishing the temperature and quantity of the injected hydrogen donor as factors and the final viscosity of oil as the response. Then, a numerical model was developed in the Ansys Fluent software using multiphase models, where the required properties of the fluid were obtained via laboratory tests and the Aspen HYSYS software. The results obtained from numerical experimentation were analyzed, and it was observed that the final viscosity was less affected by the temperature than by the hydrogen donor. Moreover, numerical modeling showed an exponential relation between vapor generation and temperature. The experimental and numerical data were compared, and it was found that the temperatures established in the experimental design were not high enough to generate a significant amount of vapor, which is why the decrease in viscosity was lower.