Alumina/polyurethane composites were prepared via in situ polymerization and used as thermal interface materials (TIMs). The surface of alumina particles was modified using polydopamine (PDA) and then evaluated via Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and Raman spectroscopy (Raman). Scanning electron microscope (SEM) images showed that PDA-Al2O3 has better dispersion in a polyurethane (PU) matrix than Al2O3. Compared with pure PU, the 30 wt% PDA-Al2O3/PU had 95% more Young’s modulus, 128% more tensile strength, and 76% more elongation at break than the pure PU. Dynamic mechanical analysis (DMA) results showed that the storage modulus of the 30 wt% PDA-Al2O3/PU composite improved, and the glass transition temperature (Tg) shifted to higher temperatures. The thermal conductivity of the 30 wt% PDA-Al2O3/PU composite increased by 138%. Therefore, the results showed that the prepared PDA-coated alumina can simultaneously improve both the mechanical properties and thermal conductivity of PU.
2 January 2016 in Plastics, Rubber and Composites: Macromolecular Engineering
We explore the influence of surface modification of SiO2 on dynamic properties and heat buildup of semi-efficient vulcanisates filled by both SiO2 and carbon black. Compared with untreated-SiO2-filled natural rubber (NR), vulcanisates reinforced by modified-SiO2 presents not only better filler dispersity, mechanical properties and dynamic properties, as confirmed by scanning electron microscope and rubber processing analyser, but also lower heat buildup. Fourier infrared spectroscopy and cure characteristics indicates that silane coupling agent molecules grafted on the silica surface provoke an enhanced mobility of rubber chain and adsorb onto filler surface and then decrease the barrier of crosslink reaction. Moreover, composites with Si69-modified-SiO2 show obviously the highest tear strength and lowest heat buildup attributed to that more sulphur released by Si69 also participate the vulcanisation reaction.