Concrete sleepers are one of the most important applications of a railway track system. Researchers have previously studied the impact load characteristics and ultimate load carrying capacity of a prestressed sleeper, but research on the fatigue life of prestressed concrete sleepers is limited. Fatigue damage of a prestressed concrete sleeper is mainly due to the accumulation of defects caused by the repeated load of wheel–rail interaction. Fatigue load, fatigue characteristics, and the existing design methods of prestressed concrete sleeper are summarized in this paper. The commonly used fatigue assessment methods of concrete structures are also evaluated. Based on the results of former research, this article presents a convenient fatigue life assessment method for a prestressed concrete sleeper and contrasts with the test results. The insight information gained can be used to evaluate the service performance and predict the fatigue life of the concrete sleeper, as well providing design flexibility and broadening the design principle. The outcome of this study may also improve the rail track maintenance and inspection criteria, in order to establish an appropriate track condition monitoring network in practice.
Recent developments in composite materials have resulted in their pilot adoption in railway industry, such as ‘fibre-reinforced foamed urethane (FFU)’, ‘geopolymer concrete’, ‘recycled polymer’, and ‘CarbonLoc composite’. Railway track support systems are critical for safe and reliable operations of railway tracks. There are two types of support structures, which can be designed to be either a slab or a cluster of discrete bearers or sleepers. The choice of turnout support system depends on asset management strategy of the rail operators or maintainers. The aim of this paper is to present the criteria, fundamental and multi-disciplinary issues for the design and practical selection of composite materials in railway turnout systems. As a case study, a full-scale trial to investigate in-situ behaviours of a turnout grillage system using an alternative material, ‘fibre-reinforced foamed urethane (FFU)’ bearers, is presented. Influences of the composite bearers on track geometry (recorded by track inspection vehicle ‘AK Car’ and based on survey data), track settlement, track dynamics, and acoustic characteristics are highlighted in this paper. Comparative studies of composite materials for railway track applications are reviewed and presented in order to improve material design process. This state-of-the-art review paper will also focus on practicality and environmental risks of composite components in railway built environments. It embraces the requirement considerations of new materials for use as safety-critical track elements.
29 May 2021 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Rubber concrete (RC) has been confirmed to be suitable for concrete sleeper production. This paper studies the cracking behaviour of conventional and rubber-reinforced concrete sleepers based on the results of an experimental program. The cracking behaviour in the pure bending zone was analysed up to a load of 140 kN. The crack mouth opening displacement (CMOD) was accordingly measured using a digital image correlation (DIC) method. The DIC results show that the rubber prestressed concrete sleeper (RPCS) has a resistance against crack initiation that is 20% greater than that of the conventional prestressed concrete sleeper (CPCS) under the same loading condition; however, due to the higher crack growth rate of the RPCS, the first crack detected by the operator forms at 60 kN, which corresponds to a strength approximately 9% lower compared with the 65 kN load at which the first crack is detected in the CPCS. Before the first crack (60 kN), the RPCS has a deflection 35% lower than that of the CPCS, but after cracking, at loads of 80 kN, 100 kN and 140 kN, the RPCS has a deflection 15%, 4% and 24% higher than that of the CPCS, respectively.