Room-temperature type H2S sensing devices that use Au-doped ZnFe2O4 yolk-shell microspheres as the active material have been fabricated using a solvothermal method as well as subsequent annealing and a chemical etching process. The samples are characterized using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), field-emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS). The results demonstrate that the doping of Au does not change the spinel structure of the products, which were yolk-shell microspheres, while the particle size varied with the Au doping concentration. Also, the as-fabricated sensor device exhibited excellent selectivity toward H2S gas at the room temperature; the gas-sensing property of 2 wt% Au-doped ZnFe2O4 microspheres was the best. The Au-doped ZnFe2O4 yolk-shell microspheres can be promising as a sensing material for H2S gas detecting at room temperature.
The detection of hydrogen sulfide (H2S) and ethanediamine, toxic gases that are emitted from industrial processes, is important for health and safety. An optical sensor, based on the absorption spectrum of tetrakis(4-nitrophenyl)porphyrin (TNPP) immobilized in a Nafion membrane (Nf) and deposited onto an optical waveguide glass slide, has been developed for the detection of these gases. Responses to analytes were compared for sensors modified with TNPP and Nf-TNPP composites. Among them, Nf-TNPP exhibited significant responses to H2S and ethanediamine. The analytical performance characteristics of the Nf-TNPP-modified sensor were investigated and the response mechanism is discussed in detail. The sensor exhibited excellent reproducibilities, reversibilities, and selectivities, with detection limits for H2S and ethanediamine of 1 and 10 ppb, respectively, and it is a promising candidate for use in industrial sensing applications.
A m-Cresol Purple-polyvinylpyrrolidone (m-CP-PVP) composite-film was immobilized on the surface of a potassium ion-exchanged glass optical waveguide using the spin-coating method. The optical properties of the film were probed by UV-visible Spectroscopy and Fourier Transform Infrared Spectroscopy. The transmittance variation and the structural properties of the m-CP-PVP composite film/K+-exchanged glass optical waveguide sensor were studied before and after reaction with an amine and volatile organic gases. When the sensing film was exposed to an amine gas, the color changed from yellow to purple/blue. This simply designed sensor was able to measure trimethylamine (TMA) gas down to a concentration of 0.1 ppb at room temperature, and its response and recovery times were 1.4 s and 5.6 s, respectively.
1 January 2021 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
Cadmium is one of the many toxic elements for humans even at low concentrations, and it could exist in the environment for a long time. The ion imprinting technique has gained much attention due to its selective recognition performance. In this study, a cadmium ion imprinted maleic acid-co-acrylonitrile polymeric microsphere (Cd-I-MA-co-AN) was synthesized via precipitation polymerization using Cd(II) as a template ion, acrylonitrile and maleic acid as functional monomers, divinylbenzene as a cross-linker, and potassium persulfate as an initiator. UV–vis, SEM and FTIR were used for characterization, and the adsorption conditions were observed and optimized. The adsorption capacity and selectivity of Cd-I-MA-co-AN for Cd(II) were analyzed by flame atomic absorption spectrometry (FAAS). The results documented that the optimal pH, flow rate and eluent were 6, 2 mL min−1 and 1 mol L−1 nitric acid, respectively. Compared with the non-ion imprinted maleic acid-co-acrylonitrile polymeric microsphere (NI-MA-co-AN), Cd-I-MA-co-AN had a higher adsorption capacity. The saturated adsorption capacities of Cd-I-MA-co-AN and NI-MA-co-AN were 20.46 mg g−1 and 7.64 mg g−1, respectively. The adsorption behavior of Cd-I-MA-co-AN fitted with the Freundlich isotherm model. The relative selectivity coefficients of Cd-I-MA-co-AN for Cd(II) in the presence of Cu(II), Mn(II), Ni(II) and Pb(II) were 3.79, 3.39, 3.90 and 3.31, respectively. The Cd-I-MA-co-AN showed good selectivity for Cd(II). In addition, a reusability study showed that Cd-I-MA-co-AN can be recycled ten times and has high recovery in natural water samples.