This paper describes quantitative evaluation of driving assistance systems that use on-board sensors for getting surrounding vehicle information, and/or inter-vehicle communications for sharing information with other vehicles. The safety performance of each system is quantitatively evaluated with an improved microscopic traffic flow simulator. Simulation results show that the performance of the system using both on-board sensors and inter-vehicle communications is higher than that of the system using on-board sensors only or inter-vehicle communications only. In addition, they show that the performance of the system using only communications exceeds that of the system using only sensors when the penetration ratio is greater than 96%.
This paper describes the multi-class zone ITS communication scheme considering real-time and short periodical communications for vehicle safety in intersections. In our proposed scheme, an area near an intersection is categorized into the nearest area and the quasi-nearest area. Vehicles communicate with a base station every 20 ms in the nearest area. In the quasi-nearest area, vehicles communicate with the base station for safety, and also make reservations for the communication for the nearest area. For performance evaluation, a microscopic traffic flow simulator is constructed and simulation of the scheme is carried out. We assume large intersections in Japan. First, simulation results show the required frequency bandwidth for realization of the scheme. The results show that the required frequency for vehicle safety in intersections is 12.9 MHz. Second, the performance evaluation considering shadowing effects is carried out. Though the frequency bandwidth is expanded, some vehicles can not communicate periodically because of shadowing effects. Using only half of the required frequency bandwidth causes lack of the number of communication slots. As the result, vehicles which can not communicate every 20 ms come into existence.
To ensure the safety of a handle-type electric wheelchair (hereinafter, electric wheelchair), this paper describes the applicability of using a Kinect sensor. Ensuring the mobility of elderly people is a particularly important issue to be resolved. An electric wheelchair is useful as a means of transportation for elderly people. Considering that the users of electric wheelchairs are elderly people, it is important to ensure the safety of electric wheelchairs at night. To ensure the safety of an electric wheelchair at night, we constructed a hazardous object detection system using commercially available and inexpensive Kinect sensors and examined the applicability of the system. We examined warning timing with consideration to the cognition, judgment, and operation time of elderly people. Based on this, a hazardous object detection area was determined. Furthermore, the detection of static and dynamic hazardous objects was carried out at night and the results showed that the system was able to detect with high accuracy. We also conducted experiments related to dynamic hazardous object detection during daytime. From the above, it showed that the system could be applicable to ensuring the safety of the handle-type electric wheelchair.
This paper describes the car park navigation system that provides WYSIWYAS navigation using M-CublTS, investigation of how to realize the system, construction of an experimental system, and on-line experiments. Positioning in this system is performed by detection of M-CublTS elements painted in car parks using an on-board camera. In addition, this system provides the WYSIWYAS, that is, intuitive navigation by showing the suggested direction on the user's display with the front view using an arrow. By using constructed communication environment in car parks, the navigation system enables users to guide to parking spots that they can park in real time. We carry out experiments in an actual car park and check system operation. Moreover, we discuss error correction performance under severe conditions.
This paper describes the advanced demand signals -II (ADS-II) scheme that can output signal phases based on both pedestrians' demands and drivers' demands, and also presents the basic performance evaluation of the ADS-II scheme. Firstly, we propose the ADS-II scheme, which is an improvement of the ADS scheme that controls signals using vehicles' location information, in order to output signal phases appropriate for demands both of pedestrians and vehicles. Secondly, a constructed pedestrian model is introduced to the conventional microscopic traffic simulator including the ADS scheme for performance evaluations of both pedestrians and vehicles. Finally, in terms of efficiency, basic performance of the ADS-II scheme is compared with that of the best basic coordinated signal control scheme by this simulator and results show that the ADS-II scheme is superior.
This paper proposes the M-CublTS pedestrian WYSIWYAS navigation system for intuitive guidance using tile carpets that are wide spread in buildings. We adopt tile carpets instead of textured paving blocks that we have used in our previous studies of the M-CublTS pedestrian WYSIWYAS navigation system because of their wide spread use. In addition, since for setting up only exchange tile carpets are required and wide spread mobile phone devices can be used as users' devices, realization costs are extremely low. This paper discusses follows: how to use the tile carpets as M-CublTS elements, how to design Human-Machine Interface (HMI) of users' terminals, and how to implement the navigation software on the general purpose mobile phone devices. We carry out experiments under 25 destinations scale environments in two buildings using 660 tile carpets and the experimental result shows that the average processing success rate on users' terminals is approximately 59%, furthermore according to the result of questionnaire about usability tests, such usability indexes as "operationality", "visibility", "feelings", and "usefulness" are more than 80%. Consequently, we confirm the effectiveness of the M-CublTS pedestrian WYSIWYAS navigation system using tile carpets suitable for indoor environments.