The mechanistic model LAKE2.3 was tested for its capability to predict of methane (CH4) emissions from reservoirs. Estimates of CH4 emissions from the Mozhaysk reservoir (Moscow region) provided by the model showed good agreement with instrumental in situ observations for several parameters of the water ecosystem. The average CH4 flux calculated by the model is 37.7 mgC-CH4 m−2 day−1, while according to observations, it is 34.4 mgC-CH4 m−2 day−1. Ebullition makes the largest contribution to the emissions from reservoirs (up to 95%) due to low methane solubility in water and the high oxidation rate of diffusive methane flux. During the heating period, an increase in methane emission is observed both in the model and empirical data, with a maximum before the onset of the autumn overturn. An effective parameter for calibrating the diffusive methane flux in the model is the potential rate of methane oxidation. For ebullition flux, it is the parameter q10 (an empirical parameter determining the relationship between methane generation and temperature) because methane production in bottom sediments is the most important. The results of this research can be used to develop mechanistic models and provide a necessary step toward regional and global simulations of lacustrine methane emission using LAKE2.3.
Anthropogenic reservoirs are not only sources of clean energy, flow regulators, recreational and food resources, but also sources of greenhouse gases such as methane. The studies presented in this work, done on a well-studied low-flowing valley reservoir mainly in the summer, when the greatest variability of methane fluxes was observe. Depending on synoptic conditions, the temporal variability of methane fluxes varies greatly. Methane fluxes increase during the summer period and huge methane emissions observed before the autumn mixing stage. Emissions can occur during the destruction of temperature stratification, as a result of stormy weather. With such emissions, methane fluxes into the atmosphere can reach about 20 mgC*m-2*d-1, which is higher than the emission during convection. Revealing the patterns of spatio-temporal distribution of methane fluxes will help to determine the contribution of water bodies (in particular reservoirs) to the total methane budget of the atmosphere more accurately.
This paper presents a study of the thermal structure, circulation, and mixing processes in an inland water body by taking into account horizontal heterogeneity using a three-dimensional thermohydrodynamics model. The object of this study was the Rybinsk Reservoir, a large inland water body with complex morphology. Field measurement data and ERA5 reanalysis data, as well as a three-dimensional numerical model (which is a development by the authors of this article), were used in this research. The results of the numerical experiments show that three-dimensional numerical modeling, which explicitly takes into account the contribution of seiche oscillations, allows us to describe the temperature distribution in a water body with sufficient accuracy, and this plays a fundamental role in studies of inland water objects. The obtained results could be useful for a model representation of the biochemical processes occurring in lakes and reservoirs. Thus, for models of less spatial detail that are, for example, used to hlrepresent lakes in Earth system models, it is necessary to take into account seiches in the form of parameterizations.
1 December 2020 in IOP Conference Series: Earth and Environmental Science
A very important problem nowadays is to assess anthropogenic impact on global warming. Increasing greenhouse gas concentrations in the atmosphere is the main reason for the rising global planet temperatures. The most important greenhouse gases (GHGs) are carbon dioxide and methane. The forcing made by carbon dioxide has been studied for a long time, while less attention has been focused on methane in this regard. However, more and more evidence indicates significant methane emissions into the atmosphere from anthropogenic sources. Less studied, but also important sources of methane are artificial reservoirs. In order to more accurately estimate methane emissions from the reservoirs, it is necessary to study the processes occurring with methane in the aquatic ecosystems in detail. For this purpose, in this study a Mozhaysk reservoir located in Moscow region is chosen. Studies of the spatial and temporal variations of methane fluxes have been carried out on this site for 6 years since 2015. In addition, this reservoir is used for validation of a well-known model, LAKE. This model can be used as an instrument for detailed estimation of methane emissions into the atmosphere from the surface of reservoirs.
1 August 2021 in IOP Conference Series: Earth and Environmental Science
Reservoirs are a significant source of methane in the atmosphere. Different estimations of the total methane emission from reservoirs vary greatly. In order to more accurately estimation of the methane emission from reservoirs, it is necessary to investigate the spatiotemporal variability of CH4 fluxes. To study this variability, detailed instrumental measurements of methane fluxes over a long period are required. Such measurements have been carried out for 6 years at the Mozhaisk Reservoir. These measurements showed that the determining factor of the spatiotemporal methane fluxes variability is the meteorological situation and the water level regime. These factors form the stratification of the water column. The highest values of methane flux into the atmosphere are observed in the middle part of the reservoir. The temporal variation of the methane flux is characterized by a general pattern for all years when the measurements were carried out. The methane flux increases during the summer period and reaches the highest values before the beginning of the autumn mixing stage. Also, high flux values observed during periods of storm events that cause mixing of the water column.
1 August 2024 in Izvestiya, Atmospheric and Oceanic Physics
This study investigates the formation of methane flows in the Rybinsk Reservoir and the variability of methane concentration in the water based on several field campaigns conducted in different seasons. The Rybinsk Reservoir is a very large, relatively shallow, low-flow, mesotrophic–eutrophic, morphologically complex basin–valley reservoir with multiyear flow regulation created on the Upper Volga in 1941. A total of 71 stations have been sampled for water and air to determine methane concentrations, combined with profiling the water column. As a result, a network of reference stations is established for regular measurements, along with additional stations in the reservoir and river mouths. Control samples are taken from the hydroelectric units of the hydropower plant, as well as downstream of the Sheksna HPP dam within the city of Rybinsk. Overall, the Rybinsk Reservoir is characterized by relatively low methane concentrations—at most stations, the average dissolved CH4 content does not exceed 20 µL/L. The lowest concentrations are observed in the winter period. Methane fluxes from the surface of the Rybinsk Reservoir range from 4 to 718 mgC–CH4 m–2 day–1. Specific fluxes (SFs) measured in the summer period are higher than those measured in the fall, and in summer, the spatial variability of the measured fluxes is more significant. Flux values depend on the stratification of the reservoir, the oxygen content in the water, organic matter in the bottom sediments, and other factors. Methane degassing through the dam is significantly less than the surface fluxes.