Background: Hundreds of millions of tons coal fly ash are produced annually to support economic development and industrial production. However, directly applying coal fly ash to agricultural production can decrease the land productivity and pose a threat to the ecosystem due to the poor physicochemical properties and seriously heavy metal pollution. Methods: In this study, a field experiment to investigate the effects of coal fly ash as a soil amendment was conducted in Hebei province, China. The coal fly ash (CFA) soil field was mixed with the carrier soil (CS, without containing coal fly ash) at different rates (0–40% mass content) in the 0–20 cm layer of top soil and then mixed with a rotovator. The soil was then amended with 0.45–1.80 kg·m^− 2 of G1 soil amendment for planting corn. Purpose: The purpose of this study is to investigate the response mechanism of soil microbial community activities, and soil physicochemical properties to soil amendment and carrier soil in coal fly ash soil. Key results: The study found that the G1 amendment, which consisted of humic acid, polyacrylamide, zeolite powder, and FeSO₄·7H₂O, improved the soil chemical properties and physical structure by increasing soil bulk density and macroaggregates. The highest corn yield was observed in B5 (20% CS and 1.3500 kg·m^− 2 G1). Meanwhile, the abundance of microorganisms that facilitate the circulation of soil nutrients such as Acidobacteria (77.05%), Sphingomonas (25.60%), Nitrospira (20.78%), Streptomyces (11.32%), and Gaiella (10.20%) was increased. Conclusions: Overall, our results indicate that the use of coal fly ash soil as a amendment can enhance soil sustainability by improving soil microbial functions. These findings provide a reference for the development and application of coal fly ash soil amendments.

The adsorption mechanism of superabsorbent polymer (SAP) can provide theoretical guidance for their practical applications in different environments. However, there has been limited research on the mechanism of attapulgite–sodium polyacrylate. This research aimed to compare the Cd(II) adsorption characteristics and water retention properties of organic–inorganic composite SAP (attapulgite–sodium polyacrylate, OSAP) and organic SAP (polyacrylamide, JSAP). Batch experiments were used to investigate the kinetics of Cd(II) adsorption, as well as the thermodynamic properties and factors influencing these properties. The results show that the Cd(II) adsorption capacity was directly proportional to the pH value. The maximum adsorption capacities of OSAP and JSAP were of 770 and 345 mg·g−1. The Cd(II) adsorption for OSAP and JSAP conformed to the Langmuir and the quasi-second-order kinetic model. This indicates that chemical adsorption is the primary mechanism. The adsorption process was endothermic (ΔH0 > 0) and spontaneous (ΔG0 < 0). The water adsorption ratios of OSAP and SAP were 474.8 and 152.6 in pure water. The ratio decreases with the increase in Cd(II) concentration. OSAP and JSAP retained 67.23% and 38.37% of the initial water adsorption after six iterations of water adsorption. Hence, OSAP is more suitable than JSAP for agricultural and environmental ecological restoration in arid and semi-arid regions.