Enhancing quadrotor control to improve both precision and responsiveness is essential for expanding their deployment in complex and dynamic environments. These aerial vehicles are widely used in applications, such as aerial mapping, delivery, disaster response, and defense, where maintaining stability and accuracy is critical, especially under external disturbances like wind. This paper makes three key contributions. First, it develops a nonlinear mathematical model of a quadrotor and designs a backstepping controller for trajectory tracking. Second, the controller’s parameters are optimized using three nature-inspired algorithms: Gray Wolf Optimization (GWO), Particle Swarm Optimization (PSO), and the Flower Pollination Algorithm (FPA), enabling performance comparisons in terms of their tracking precision and control effort. Third, the robustness of the best-performing optimized controller is evaluated by applying wind disturbances at the simulation level, modeled as external forces acting along the x-axis and summed with the control input. The simulation results highlight the comparative efficiency of the optimization methods and demonstrate the robustness of the selected controller in maintaining stability and accuracy under wind-induced perturbations.
The robust control of quadcopters is essential for maintaining stability and performance in dynamic environments. This paper examines the effectiveness of Particle Swarm Optimization (PSO) and Grey Wolf Optimization (GWO) for tuning LQR-PID controllers tailored for a quadcopter constrained to rotational degrees of freedom, aiming to enhance attitude stabilization and perform a comparative robustness analysis under various disturbances. Using PSO and GWO to optimize the LQR controller’s Q and R matrices, the study minimizes a cost function based on attitude error and control effort. The optimized controllers are evaluated in a Simulink environment with external perturbation forces; noise perturbations and sudden impulse disturbances are introduced via feedback vector perturbations to simulate real-world operational challenges. The results reveal distinct robustness characteristics: the PSO-optimized controller achieves faster convergence with higher sensitivity to disturbances, while the GWO-optimized controller performs better under extreme parameter variations. By providing a detailed comparison of these optimization techniques, the study offers valuable insights into selecting the most suitable method for robust and reliable quadcopter attitude control.
The wide use of Unmanned Aerial Vehicle UAV is pushing researchers to develop and improve control techniques for these systems. An optimized LQR controller is proposed to control the 3DOF quadrotor “Quanser” in this paper using different metaheuristic algorithms PSO, FPA and ACO to calculate the controller's gains. Comparing by other works, this article presents sufficient results obtained by the three techniques proposed to control the angular positions of the studied system “Roll, Pitch and Yaw” angles especially by respecting the saturation of applied voltage to the quadrotor motors in the simulation, and it makes it possible to find the best method taking into consideration three comparison factors: stability, speed and precision.
1 December 2024 in IAES International Journal of Robotics and Automation (IJRA)
External disturbances, saturation of actuator motors, and limits of certain angular movements are commonly encountered in robotic systems, particularly those involving flight, and they present the most common and influential factors affecting the stability and performance of these systems. In this paper, a hybrid controller for a three-degree-of-freedom (3-DoF) helicopter is designed and applied to this flying robot system, taking into account the previously mentioned constraints. The proposed hybrid controller integrates proportional-derivative (PD) control with an adjusted linear quadratic regulator (ALQR) using the flower pollination algorithm (FPA) optimization method. Simulation results of travel (λ), elevation (ε), and pitch (ρ) responses, as well as experimental results of elevation and travel tracking responses under external disturbances using the bench-top Quanser’s (3-DoF) helicopter, demonstrate the robustness and good performance of the controlled system using the proposed method. The effectiveness of the proposed method is compared to several methods in the literature.
This paper presents an MPC-based LQR controller design in order to control Quanser's 3-DOF Helicopter, which is an under-actuated unmanned aerial vehicle. This MIMO system has substantially nonlinear properties and unstable dynamics with strong coupling, making it difficult to control. The aim of this regulation is to track the desired travel and elevation trajectory. In the proposed hybrid MPC-LQR approach, a linear quadratic regulator controls the system outputs by manipulating the system inputs then the model predictive controller uses the model of the plant to make predictions about the future behavior of the constrained system. A regulation performance enhancement is obtained by combining the two controllers together. A basic LQR with an integrator is used here as a second controller. The implementation, of the proposed controllers, shows that the MPC-LQR controller outperformed the LQR-I one, in terms of stability and trajectory tracking.
In this paper, both linear quadratic regulator LQR and conventional proportional-derivative PD regulators are combined to control a 3DOF helicopter. The proposed method is to design an LQR regulator to ensure the system control by placing a PD controller in the direct loop of both the “elevation” and the “travel” angles to improve the performance of the system. PD controller gains are obtained by a self-tuning, while the LQ R controller gains are calculated by a metaheuristic optimization method, based on the Flower Pollination Algorithm FPA and which serves to minimize the error between the desired angular position and that of the system response. The obtained results show that the proposed method is adequate to control the system with very good performances on the elevation and travel axes by using a limited action on the pitch angle.