Wearable electronic devices have shown great application prospects in the fields of tactile sensing, electronic skin, and soft robots. However, the existing wearable electronic devices face limitations such as power supply challenges, lack of portability, and discomfort, which restrict their applications. The invention of triboelectric nanogenerators (TENGs) with dual functions of energy harvesting and sensing provides an innovative solution to address these issues. This study prepared a highly stretchable conductive hydrogel using doped conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as a strain sensor, demonstrating high sensitivity (GF = 4.31), an ultra-wide sensing range (0–1690%), ultra-fast response speed (0.15 s), excellent durability, and repeatability. A high-performance triboelectric nanogenerator was constructed using the hydrogel as an electrode, achieving an output performance of up to 192 V. Furthermore, the TENG fixed in the hands, wrists, legs, and feet of the human body can be used as a wearable electronic device to monitor human motion, which is conducive to promoting the development of triboelectric nanogenerators based on conductive hydrogels in strain sensors and self-powered wearable devices.

Superhydrophobic coatings show great application potential in many fields, but they have not been widely used due to poor stability. A Ni-PTFE-SiC composite coating was proposed in this paper. Firstly, the Ni-PTFE-SiC coating structure was designed by molecular dynamics simulations. The feasibility of superhydrophobic effect of this structure and the adsorption stability of the composite coatings were proved. This approach can also be used to avoid trial and errors when selecting other similar candidate substances. Then, the Ni-PTFE-SiC superhydrophobic coatings were successfully prepared by composite electrodeposition, with the water contact angle of more than 155° and the sliding angle of close to 0°. The effects of current density, deposition time and nanoparticle concentration on the wettability and morphology of the coatings were also investigated. Through comparative experiments, the best preparation parameters were: PTFE 14 g L⁻¹, SiC 6 g L⁻¹, primary current density 7 A dm⁻² (10 min) and secondary current density 15 A dm⁻² (5 min). This preparation method doesn’t need additional modification with low surface energy substances like the traditional preparation process, and greatly improves the corrosion resistance, wear resistance and durability of the coatings.