The wood pellet export from Canada to Europe has been increasing steadily in recent years (roughly 1.9 million tonnes in 2013). Due to the distances involved, wood pellets remain in transit and storage for months before their final consumption. The net calorific value (NCV) determines the price of wood pellet purchased in Europe. There have been concerns about the changes of NCV over time. In this study, the effects of storage time, storage configuration, storage temperature, and wood pellet quality on the NCV of wood pellets over a period of 6 months were investigated. Storage configurations were “open” or “closed” and storage temperatures were 25, 35 and 45°C. Two types of wood pellets (white and mixed) were used in the study. The results pertinent to closed storage indicated that storage time had a positive effect on the NCV, where NCV increased by 1-2% over the storage period. In open storage, moisture content had the most significant impact on the NCV. The NCV of the two types of wood pellets were found to be significantly different at p < 0.001. The graphical results were verified by multivariable linear regression and analysis of variance. The authors postulated that the compounds with higher energy potential, such as aldehydes and ketones produced during pellet storage, caused the increase in net calorific values.
Injection molding technology is one of the most promising candidates for the economically viable manufacturing of nanoscale parts, but the composition and surface properties of tooling materials become more critical as the size of the molded features decreases. In the study, the effect of novel tooling with micro and nanoscale features was investigated by employing this tooling as inserts for micro injection molding of polycarbonate. Parts molded from etched silicon wafers with pattern depths of 300 nm and widths of 200 to 980 nm showed a significant decrease in replication quality with the size the features, probably because polymer adhered to the tooling surface. Silicon tooling from a different source and titanium-coated gallium arsenide tooling produced higher quality replication. The replication quality from the silicon tooling, however, was constant over 3000 molding cycles and coated gallium arsenide inserts survived the molding pressures; (the uncoated gallium arsenide fractured). These findings suggest that modifications to the insert surfaces will allow for viable tooling for injection molding of plastic parts with nanoscale features.