Electrical Discharge Machining (EDM) is a machining method commonly used to produce complex shapes and deep holes by eroding hard metals with an electric arc. There is a growing demand for process simulation using finite element models in order to improve the quality and efficiency of EDM, to reduce costs, to improve resource efficiency, and to facilitate its application in critical areas such as aerospace and mechanical engineering. Finite element models have greatly improved the prediction accuracy of EDM processes, simulated complex hybrid machining processes, and provided important guidance for the optimization of EDM processes. This paper systematically reviews the research progress of finite element modeling for EDM. Finite element method modeling is evaluated mainly in terms of four indicators: material removal rate, surface roughness, tool wear ratio, and recast layer thickness. Firstly, the importance and application of EDM are described, and the EDM finite element method modeling and its advantages are summarized. Then, the single-spark simulation model and the multi-spark simulation model of EDM are compared and discussed. Among the mainstream finite element models, the prediction error of the material removal rate for single-spark simulation ranges from 8.2% to 14.75%, while the prediction error of the recast layer thickness for multi-spark simulation can be as low as 1.98%. Finally, the applications of finite element modeling in EDM hybrid machining processes’ performance prediction and new material machining are summarized, and future research directions and trends in EDM finite element modeling are predicted.

In recent years, as an important functional material, glass has been widely used in architecture, electronics, optics, and other fields. As an emerging glass processing technology, the glass molding process (GMP) has received widespread attention and research in recent years. In this paper, we study the modeling and analysis of different heat transfer strategies for the energy efficiency of large-sized automotive instrument glass. The heat transfer model of the metal heating plate–conducting plate mold is established, the thermal energy efficiency in the forming process of large automobile glass is analyzed, and the energy efficiency of the mold in the heating stage is compared. The energy consumption per piece generated by the GMP heating device is reduced from 4865.2 to 4668.5 kJ, a reduction of 4.04%. By optimizing the heat flow density, the energy consumption per piece generated by the GMP heating device was reduced from 4865.2 to 4625.5 kJ, a reduction of 4.92%, meeting the sustainable manufacturing requirements.

This paper proposed a hybrid intelligent process model, based on a hybrid model combining the two-temperature model (TTM) and molecular dynamics simulation (MDS) (TTM-MDS). Combined atomistic-continuum modeling of short-pulse laser melting and disintegration of metal films [Physical Review B, 68, (064114):1–22.], and Gaussian process regression (GPR), for micro-electrical discharge machining (micro-EDM) were also used. A model of single-spark micro-EDM process has been constructed based on TTM-MDS model to predict the removed depth (RD) and material removal rate (MRR). Then, a GPR model was proposed to establish the relationship between input process parameters (energy area density and pulse-on duration) and the process responses (RD and MRR) for micro-EDM machining. The GPR model was trained, tested, and tuned using the data generated from the numerical simulations. Through the GPR model, it was found that micro-EDM process responses can be accurately predicted for the chosen process conditions. Therefore, the hybrid intelligent model proposed in this paper can be used for a micro-EDM process to predict the performance.

The heating system is an essential component of the glass molding process. It is responsible for heating the glass to an appropriate temperature, allowing it to soften and be easily molded. However, the energy consumption of the heating system becomes particularly significant in large-scale production. This study utilized G-11 glass for the simulation analysis and developed a finite element model for the thermal conduction of a 3D ultra-thin glass molding system, as well as a thermal bending model for smartwatches. Using finite element software, the heat transfer between the mold and the glass was modeled, and the temperature distribution and thermal stress under various processing conditions were predicted. The findings of the simulation, when subjected to a numerical analysis, showed that heating rate techniques significantly affect energy consumption. This study devised a total of four heating strategies. Upon comparison, optimizing with heating strategy 4, which applies an initial heating rate of 35 mJ/(mm²·s) during the initial phase (0 to 60 s) and subsequently escalates to 45 mJ/(mm²·s) during the second phase (60 to 160 s), resulted in a reduction of 4.396% in the system’s thermal output and a notable decrease of 7.875% in the heating duration, respectively. Furthermore, a single-factor research method was employed to study the forming process parameters. By comparing the numerical simulation results, it was found that within the temperature range of 615–625 °C, a molding pressure of 25–35 MPa, a heating rate of 1.5–2.5 °C/s, a cooling rate of 0.5–1 °C/s, and a pulse pressure of 45–55 Hz, the influence on residual stress and shape deviation in the glass was minimal. The relative error range was within the 20% acceptable limit, according to the experimental validation, which offered crucial direction and ideas for process development.