Numerical simulations are usually used to analyze and optimize the performance of the nanofluid-filled absorber tube with fins. However, solving partial differential equations (PDEs) repeatedly requires considerable computational cost. This study develops two deep neural network-based reduced-order models to accurately and rapidly predict the temperature field and heat flux of nanofluid-filled absorber tubes with rectangular fins, respectively. Both network models contain a convolutional path, receiving and extracting cross-sectional geometry information of the absorber tube presented by signed distance function (SDF); then, the following deconvolutional blocks or fully connected layers decode the temperature field or heat flux out from the highly encoded feature map. According to the results, the average accuracy of the temperature field prediction is higher than 99.9% and the computational speed is four orders faster than numerical simulation. For heat flux estimation, the R2 of 81 samples reaches 0.9995 and the average accuracy is higher than 99.7%. The same as the field prediction, the heat flux prediction also takes much less computational time than numerical simulation, with 0.004 s versus 393 s. In addition, the changeable learning rate strategy is applied, and the influence of learning rate and dataset size on the evolution of accuracy are investigated. According to our literature review, this is the first study to estimate the temperature field and heat flux of the outlet cross section in 3D nanofluid-filled fined absorber tubes using a deep convolutional neural network. The results of the current work verify both the high accuracy and efficiency of the proposed network model, which shows its huge potential for the fin-shape design and optimization of nanofluid-filled absorber tubes.
In order to attain precise and robust transformation estimation in simultaneous localization and mapping (SLAM) tasks, the integration of multiple sensors has demonstrated effectiveness and significant potential in robotics applications. Our work emerges as a rapid tightly coupled LIDAR-inertial-visual SLAM system, comprising three tightly coupled components: the LIO module, the VIO module, and the loop closure detection module. The LIO module directly constructs raw scanning point increments into a point cloud map for matching. The VIO component performs image alignment by aligning the observed points and the loop closure detection module imparts real-time cumulative error correction through factor graph optimization using the iSAM2 optimizer. The three components are integrated via an error state iterative Kalman filter (ESIKF). To alleviate computational efforts in loop closure detection, a coarse-to-fine point cloud matching approach is employed, leverging Quatro for deriving a priori state for keyframe point clouds and NanoGICP for detailed transformation computation. Experimental evaluations conducted on both open and private datasets substantiate the superior performance of the proposed method compared to similar approaches. The results indicate the adaptability of this method to various challenging situations.
In order to attain precise and robust transformation estimation in simultaneous localization and mapping (SLAM) tasks, the integration of multiple sensors has demonstrated effectiveness and significant potential in robotics applications. QN-SAM-LIVO is a rapid tightly-coupled LiDAR-Inertial-Visual SLAM system, which consists of three tightly-coupled components: the LIO module, the VIO module, and the loop closure detection module. The LIO module directly constructs the raw scanning point increments into a point cloud map, which is used for matching. The VIO component performs image alignment by aligning the observed points and the loop closure detection module provides the system with real-time cumulative error correction through factor graph optimization based on the iSAM2 optimizer. The three components are integrated together via an error state iterative Kalman filter (ESIKF) to provide accurate odometry information, while optimizing the color point cloud construction of conventional non-solid-state LiDAR. To reduce the computational effort for loop closure detection, we use a coarse-to-fine point cloud matching approach, using Quatro to derive a priori states for the keyframe point cloud, followed by detailed transformation computation using NanoGICP. Experimental evaluations conducted on both open and private datasets substantiate the superior performance of the proposed method compared to other similar approaches. The results indicate the adaptability of the method to various challenging situations.