Integrating a highly conductive carbon host and polar inorganic compounds has been widely reported to improve the electrochemical performances for promising low-cost lithium sulfur batteries. Herein, a MoS2/mesoporous carbon hollow sphere (MoS2/MCHS) structure has been proposed as an efficient sulfur cathode via a simple wet impregnation method and gas phase vulcanization method. Multi-fold structural merits have been demonstrated for the MoS2/MCHS structures. On one hand, the mesoporous carbon hollow sphere (MCHS) matrix, with abundant pore structures and high specific surface areas, could load a large amount of sulfur, improve the electronical conductivity of sulfur electrodes, and suppress the volume changes during the repeated sulfur conversion processes. On the other hand, ultrathin multi-layer MoS2 nanosheets are revealed to be uniformly distributed in the mesoporous carbon hollow spheres, enhancing the physical adsorption and chemical entrapment functionalities towards the soluble polysulfide species. Having benefited from these structural advantages, the sulfur-impregnated MoS2/MCHS cathode presents remarkably improved electrochemical performances in terms of lower voltage polarization, higher reversible capacity (1094.3 mAh g−1), higher rate capability (590.2 mAh g−1 at 2 C), and better cycling stability (556 mAh g−1 after 400 cycles at 2 C) compared to the sulfur-impregnated MCHS cathode. This work offers a novel delicate design strategy for functional materials to achieve high performance lithium sulfur batteries.
The rupture of a micro/nano container can trigger the release of repair agents and provides the coating with a self-healing and anti-corrosion effect. However, the defect and inhomogeneity of the coating, produced by the rupture of the micro/nano container, may weaken its anti-corrosion performance. This study reports a rare protection mechanism, which optimizes the space occupying of zirconium phosphate, and the de-doping peculiarity of polyaniline without the rupture of the micro/nano container. Polyaniline/α-zirconium phosphate composites were constructed through in situ oxidation polymerization. Repair agents were added in the form of doped acids. According to the different repair agents in polyaniline/α-zirconium phosphate composites (citric ion, tartaric ion and phytic ion), the performance and protection mechanism of the composites were researched. Polyaniline/α-zirconium phosphate coating (with phytic ion) shows an excellent self-healing anti-corrosive effect, due to the large spatial structure and abundant chelating groups of the precipitation inhibitor. Considering the anti-corrosive application, the developed polyaniline/α-zirconium phosphate composite has a far-reaching influence on marine development.
D-Gluconhydroximo-1,5-lactam and its oxime-substituted derivatives were prepared and assessed for inhibition and pharmacological chaperone (PC) activities in Gaucher disease cell lines derived from N370S. The most active compound, O-(D-glucopyranosylidene) amino-Z-N-dodecylcarbamate (38), gave a nearly 2.0-fold increase in N370S β-GCase activity at 12.5 μM with no inhibition to other commercially available glucosidases. Docking studies of ligand–enzyme interactions have also been conducted to account for the results of enzyme activity increase. All these results demonstrate that compound 38 is a promising PC for the treatment of GD.
Three-dimensional hierarchical porous graphitic carbon (HPGC) were synthesized via one-step carbonization-activation and a catalytic strategy. The method can not only improve the graphitization degree of carbon materials, but also offer plentiful interfaces for charge accumulation and short paths for ion/electron transport. Polypyrrole, potassium hydroxide, and nickel acetate were used as the carbon precursors, activating agent, and catalyst, respectively. The retraction and dissolution of Ni caused the change of pore size in the material and led to the interconnected micro/nano holes. Nickel acetate played a significant role in enhancing the electrical conductivity, introducing pseudocapacitance, and promoting ion diffusion. In the supercapacitor, HPGC electrode exhibited a remarkable specific capacitance of 336.3 F g−1 under 0.5 A g−1 current density and showed high rate capability, even with large current densities applied (up to 50 A g−1). Moreover, HPGC showed optimal cycling stability with 97.4% capacitance retention followed by 3000 charge-discharge cycles. The excellent electrochemical performances coupled with a facile large-scale synthesis procedure make HPGC a promising alternative for supercapacitors.
12 May 2025 in Journal of Coatings Technology and Research