Adel Elgammal

Prof. Adel Elgammal

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2009
Verified
Conference Paper
Closed access
Adel M. SharafAdel M. Sharaf
Adel M. Sharaf
AEAdel Elgammal
Adel Elgammal
In this paper, a novel discrete optimization approach is developed to optimally solve the optimization problem of power system shunt filter design based on discrete multi objective particle swarm optimization MOPSO technique to ensure harmonic current reduction and noise mitigation on electrical utility grid. In this novel optimization approach, multi objective particle swarm optimization MOPSO is implemented to tackle a number of conflicting goals that define the optimality problem. This paper deals with three conflicting objective functions. These conflicting functions are: 1. Minimum harmonic current penetration into the electric grid system, 2. Maximum harmonic current absorption by the harmonic power filter, 3. Minimum harmonic voltage distortion at the point of common coupling, Throughout the optimization process, all power filter parameters are being treated as either continuous or discrete variables. The shunt power filter design and optimization is performed over a specified set of discrete dominant offending harmonics.

1 January 2007
Verified
Conference Paper
Closed access
RHRadwan H. A. Hamid
Radwan H. A. Hamid
AAAmr M. A. Amin
Amr M. A. Amin
RARefaat S. Ahmed
Refaat S. Ahmed
AEAdel Elgammal
Adel Elgammal
This paper presents an optimization controller for three-phase induction motor. In this controller, Multi Objective Particle Swarm Optimization MOPSO is implemented to tackle all the conflicting goals that define the problem. This paper deals with two conflicting objective functions. These conflicting functions are: 1. Maximize the efficiency of the drive system, and 2. Maximize the power factor of the induction motor. The proposed technique are based on the principle that the flux level in a machine can be adjusted to give the trade-off solution of maximum efficiency and maximum power factor for a given value of speed and load torque. The optimum flux levels are function of the machine load and speed requirements. Simulation results show that considerable efficiency and power factor improvements are achieved using MOPSO when compared with the Field Oriented Control (FOC) and Constant Voltage to Frequency Ratio Control (CVFRC).

1 January 2006
Verified
Conference Paper
Closed access
RHRadwan H. A. Hamid
Radwan H. A. Hamid
AAAmr M. A. Amin
Amr M. A. Amin
RARefaat S. Ahmed
Refaat S. Ahmed
AEAdel Elgammal
Adel Elgammal
This paper presents the application of neural network based on PSO for losses and operating cost minimization control in the induction motor drives. In this paper, four strategies for induction motor speed control are proposed. Those four strategies are based on PSO and called maximum efficiency strategy, minimum stator current strategy, maximum power factor strategy, and maximum weighted cost strategy. The proposed technique is based on the principle that the flux level in a machine can be adjusted to give the minimum amount of losses and minimum operating cost for a given value of speed and load torque. The main advantages of the proposed technique are; its simple structure and its straightforward maximization of induction motor efficiency and its operating cost for a given load torque. As will be demonstrated, PSO is so efficient in finding the optimum operating machine's flux level. The optimum flux level is a function of the machine load and speed requirements. Simulation results show that a considerable energy and cost savings is achieved in comparison with the conventional method of operation under the condition of constant voltage to frequency ratio and field oriented control.

31 December 2025 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
AEAdel Elgammal
Adel Elgammal
Hydrogen–Fuel Cell (HFC) systems have become one of the most promising zero-carbon shipping solutions, with high energy-conversion efficiency, silent operation and potential for full decarbonization when coupled with renewable hydrogen production. Yet, the operational efficiency of HFC marine power systems is significantly affected by nonlinear electrochemical kinetics, interactions between subsystems and extremely wide fluctuating load profiles typical for naval service missions. The resulting complex multi-variable control laws open up trade-offs between efficiency, hydrogen consumption, dynamic response and emission of auxiliary by-products like NOx, unconverted hydrogen and water vapor exhaust. To tackle these issues, the present work puts forward a complete Multi Objective Particle Swarm Optimization (MOPSO) framework for the combined performance and emissions optimization of hydrogen marine–FC propulsion systems. The MOPSO technique is used to optimize decision variables such as fuel cell operating current density, stack temperature, air stoichiometric ratio, compressor control and the proportion at which ESS is lead on hybrid with a Pareto-optimal trade-offs between: (i) system efficiency, (ii) hydrogen consumption, (iii) emissions and by-product reduction, and (iv) component degradation and thermal stress reduction. A high-fidelity dynamic simulation model has been developed, combining PEM fuel cell electrochemical kinetics, onboard power demand information and compressor-humidifier dynamics with marine propulsion load cycles for patrol, ferry and tugboat duties. Results show that the MOPSO optimized control strategy increases net fuel cell efficiency by 12-18%, decreases hydrogen consumption by 15-27%, and decreases auxiliary emissions and stack temperature excursions by up to 35% as compared with the baseline, rule based, and single-objective tuning approaches. Moreover, degradation parameters such as voltage decay rate and membrane hydration instability were dramatically mitigated which enabled extension of the projected stack life time by 20–30%.

13 February 2026 in Journal of Energy Research and Reviews
Verified
Journal Article
Closed access
AEAdel Elgammal
Adel Elgammal
This paper presents a reliable power-electronics control and energy-management system for PEM fuel-cell electric vehicles (FCEVs) equipped with hybrid energy storage (battery–supercapacitor) to guarantee stability of the system in the presence of sudden load variations and parameter intervals. A unidirectional DC–DC interface for the PEMFC, bidirectional DC–DC stages for the battery and supercapacitor, and a traction inverter feeding the electric drive are included in this system. Real-time power split of the fuel cell and supercapacitor is achieved by a fuzzy-logic supervisory controller, which employs rule-based decision making with respect to NBC traction demand, DC-link voltage error, PEMFC ramp constraints, battery/supercapacitor SOC/SOE limits. A multi-objective particle swarm optimization (MOPSO) layer optimizes fuzzy membership parameters and weighting factors with multiple objectives that enable the minimization of hydrogen consumption, DC-link ripple, peak converter currents, and inverter stress as well as the imposition of fuel-cell current-slew rate limits and storage health constraints. Stability is tested with dual uncertainties in fuel- cell polaristic/ohmic parameters and converter/inverter elements (e.g., ±20% fluctuations in the main electrical parameters), and under aggressive step-load perturbations. Simulations with representative drive cycles along with step-load disturbances (e.g., 0.3–0.5 pu torque/power steps) reveal that the fuzzy–MOPSO approach reduces DC-link voltage overshoot by 40–60% and settling time by 30–45% compared to cascaded PI control and non-optimized fuzzy supervision were observed. The DC-link ripple amplitude was reduced by 35–55%, and the peak currents in the supercapacitor and battery utilization were decreased by 20–35% demonstrating less thermal stress and increased reliability. The supercapacitor provided the high-frequency transients, while the battery the midfrequency dynamics, and the PEMFC supplied nominal power with safe ramp limits, achieving a reduction in hydrogen consumption of 5-12% across tested cycles. In summary, the results demonstrate that fuzzy–MOPSO co-design offers a practical method to robust, efficient and durable FCEV powertrain control under real driving fluctuations and uncertainties.

18 June 2026 in Asian Engineering Review
Verified
Journal Article
Open access
PDF file
AEAdel Elgammal
Adel Elgammal
This study proposes an intelligent control framework that integrates deep reinforcement learning (DRL) and multi-objective particle swarm optimization (MOPSO) to enhance the dynamic performance, energy efficiency, and robustness of three-phase asynchronous motor drives applied in sustainable electrification systems. The proposed framework integrates a DRL agent with an MOPSO optimizer within an adaptive control architecture. The DRL controller learns optimal control policies through continuous interaction with the motor drive system, while MOPSO simultaneously optimizes multiple conflicting objectives, including torque ripple minimization, total harmonic distortion (THD) reduction, speed-tracking accuracy improvement, and energy-efficiency enhancement. The controller is evaluated using a high-fidelity MATLAB/Simulink induction motor model under load disturbances, parameter variations, and stochastic uncertainties. Simulation results demonstrate torque ripple reductions of 25–30% compared with conventional Field-Oriented Control (FOC) and Direct Torque Control (DTC). THD decreases from 6.8% (DTC) and 4.1% (FOC) to approximately 1.9%, while speed-response settling time is reduced to 0.12 s with less than 4% overshoot. Drive efficiency improves by 8–12%, and performance deviations remain below 5% under uncertain operating conditions. The proposed DRL–MOPSO framework significantly outperforms conventional control methods in terms of efficiency, dynamic response, and robustness. The framework offers a viable intelligent control solution for electric vehicles, industrial automation, and renewable-energy-powered drive systems, supporting sustainable and reliable electrified applications.