In this paper, we address Quality-of-Service (QoS)-aware routing issue for Body Sensor Networks (BSNs) in delay and reliability domains. We propose a data-centric multiobjective QoS-Aware routing protocol, called DMQoS, which facilitates the system to achieve customized QoS services for each traffic category differentiated according to the generated data types. It uses modular design architecture wherein different units operate in coordination to provide multiple QoS services. Their operation exploits geographic locations and QoS performance of the neighbor nodes and implements a localized hop-by-hop routing. Moreover, the protocol ensures (almost) a homogeneous energy dissipation rate for all routing nodes in the network through a multiobjective Lexicographic Optimization-based geographic forwarding. We have performed extensive simulations of the proposed protocol, and the results show that DMQoS has significant performance improvements over several state-of-the-art approaches.
In collaborative body sensor networks, namely wireless body area networks(WBANs), each of the physical sensor applications is used to collaboratively monitor thehealth status of the human body. The applications of WBANs comprise diverse and dynamictraffic loads such as very low-rate periodic monitoring (i.e., observation) data and high-ratetraffic including event-triggered bursts. Therefore, in designing a medium access control(MAC) protocol for WBANs, energy conservation should be the primary concern duringlow-traffic periods, whereas a balance between satisfying high-throughput demand andefficient energy usage is necessary during high-traffic times. In this paper, we design atraffic load-aware innovative MAC solution for WBANs, called ATLAS. The design exploitsthe superframe structure of the IEEE 802.15.4 standard, and it adaptively uses the contentionaccess period (CAP), contention free period (CFP) and inactive period (IP) of the superframebased on estimated traffic load, by applying a dynamic “wh” (whenever which is required)approach. Unlike earlier work, the proposed MAC design includes load estimation fornetwork load-status awareness and a multi-hop communication pattern in order to preventenergy loss associated with long range transmission. Finally, ATLAS is evaluated throughextensive simulations in ns-2 and the results demonstrate the effectiveness of the protocol.
TheIP-based Ubiquitous Sensor Network (IP-USN) is an effort to build the “Internet of things”. By utilizing IP for low power networks, we can benefit from existing well established tools and technologies of IP networks. Along with many other unresolved issues, securing IP-USN is of great concern for researchers so that future market satisfaction and demands can be met. Without proper security measures, both reactive and proactive, it is hard to envisage an IP-USN realm. In this paper we present a design of an IDS (Intrusion Detection System) called RIDES (Robust Intrusion DEtection System) for IP-USN. RIDES is a hybrid intrusion detection system, which incorporates both Signature and Anomaly based intrusion detection components. For signature based intrusion detection this paper only discusses the implementation of distributed pattern matching algorithm with the help of signature-code, a dynamically created attack-signature identifier. Other aspects, such as creation of rules are not discussed. On the other hand, for anomaly based detection we propose a scoring classifier based on the SPC (Statistical Process Control) technique called CUSUM charts. We also investigate the settings and their effects on the performance of related parameters for both of the components.
IEEE 1588 is the clock synchronization protocol for networked measurement and control system, and widely used for both wire-line and wireless network environments. IEEE 1588 was initially considered for wire-line networks, but its application is extended to wireless network especially for indoor wireless networks which can not use Global Positioning System (GPS) technology. However, the conventional IEEE 1588 assumes symmetric/asymmetric fixed data rate links, and time accuracy errors are caused for dynamically changing wireless links. We propose an enhanced synchronization algorithm for IEEE 1588 in order to compensate the offset error due to the dynamically changing data rate of the wireless link and to enhance the accuracy of time.
In our modern world, many Internet of Things (IoT) technologies are being researched and developed. IoT devices are currently being used in many fields. IoT devices use Wi-Fi and Bluetooth, however, communication distance is short and battery consumption is high. In areas such as smart cities and smart farms, IoT technology is needed to support a wide coverage with low power consumption. Low Power Wide Area (LPWA), which is a transmission used in IoT supporting a wide area with low power consumption, has evolved. LPWA includes Long Range (LoRa), Narrowband (NB-IoT), and Sigfox. LoRa offers many benefits as it communicates the longest distances, is cheap and consumes less battery. LoRa is used in many countries and covers a range of hundreds of square kilometers (km2) with a single gateway. However, if there are many obstacles to smart cities and smart farms, it causes communication problems. This paper proposes two (2) solutions to this problem: the relay method which is a multi-hop method and the Automatic Repeat Request (ARQ) system that detects packet loss in real-time and requests retransmission for LoRa. In this study, the actual performance of LoRa in the problematic environment was measured and the proposed method was applied. It was confirmed that the transmission rate of LoRa dropped when there were many obstacles such as trees. To use LoRa in a smart farm with a lot of space, multi-hop was observed to be better. An ARQ system is needed to compensate for the unexpected drop in the forward rate due to the increase in IoT devices. This research focused on reliability, however, additional network methods and automatic repeat request (ARQ) systems considering battery time should be researched in symmetry. This study covers the interdisciplinary field of computer science and wireless low power communication engineering. We have analyzed the LoRa/LoRaWAN technology in an experimental approach, which has been somewhat less studied than cellular network or WiFi technology. In addition, we presented and improved the performance evaluation results in consideration of various local and climatic environments.
9 October 2009 in IEEE Transactions on Consumer Electronics
Car navigation systems (CNS) have become an interesting research and industrial topic due to their wide deployment. However, updating and distribution of the road map database is a complex and high cost process. In this paper, we propose a real-time map generation and updating algorithm, which fulfills or corrects the unknown road area of the conventional road map database by using global positioning system (GPS) information and wireless communication technologies. To generate the road map of unknown roads, the proposed algorithm uses road images, which can be obtained when a driver travels unknown roads. When a driver travels unknown roads, which do not appear on the map of the car navigation system, the car navigation system extracts GPS and image information of the unknown roads. Then, the car navigation system generates the road map for the unknown roads by extracting location and road information, and updates the road map database in the car. After updating the local road map database, the car navigation system updates the master road map database, which is located at the network and is distributed to other car navigation systems. Thus, the road map database provider can update the road map database of other car navigation systems, which share the same master road map database. The proposed algorithm provides an efficient updating process of the road map database with a simplified process and reduced time for unknown road areas.