The demand for precise positioning in noisy environments has propelled the development of research on array antenna radar systems. Although the orthogonal matching pursuit (OMP) algorithm demonstrates superior performance in signal reconstruction, its application efficacy in noisy settings faces challenges. Consequently, this paper introduces an innovative OMP algorithm, DTM_OMP_ICA (a dual-threshold mask OMP algorithm based on independent component analysis), which optimizes the OMP signal reconstruction framework by utilizing two different observation bases in conjunction with independent component analysis (ICA). By implementing a mean mask strategy, it effectively denoises signals received by array antennas in noisy environments. Simulation results reveal that compared to traditional OMP algorithms, the DTM_OMP_ICA algorithm shows significant advantages in noise suppression capability and algorithm stability. Under optimal conditions, this algorithm achieves a noise suppression rate of up to 96.8%, with its stability also reaching as high as 99%. Furthermore, DTM_OMP_ICA surpasses traditional denoising algorithms in practical denoising applications, proving its effectiveness in reconstructing array antenna signals in noisy settings. This presents an efficient method for accurately reconstructing array antenna signals against a noisy backdrop.

In recent years, separating effective target signals from mixed signals has become a hot and challenging topic in signal research. The SI-BSS (Blind source separation (BSS) based on swarm intelligence (SI) algorithm) has become an effective method for the linear mixture BSS. However, the SI-BSS has the problem of incomplete separation, as not all the signal sources can be separated. An improved algorithm for BSS with SI based on signal cross-correlation (SI-XBSS) is proposed in this paper. Our method created a candidate separation pool that contains more separated signals than the traditional SI-BSS does; it identified the final separated signals by the value of the minimum cross-correlation in the pool. Compared with the traditional SI-BSS, the SI-XBSS was applied in six SI algorithms (Particle Swarm Optimization (PSO), Genetic Algorithm (GA), Differential Evolution (DE), Sine Cosine Algorithm (SCA), Butterfly Optimization Algorithm (BOA), and Crow Search Algorithm (CSA)). The results showed that the SI-XBSS could effectively achieve a higher separation success rate, which was over 35% higher than traditional SI-BSS on average. Moreover, SI-SDR increased by 14.72 on average.

The detection of water changes in plant stems by non-destructive online methods has become a hot spot in studying the physiological activity of plant water. In this paper, the ultrasonic radio-frequency echo (RFID) technique was used to detect water changes in stems. An algorithm (improved hybrid differential Akaike’s Information Criterion (AIC)) was proposed to automatically compute the position of the primary ultrasonic echo of stems, which is the key parameter of water changes in stems. This method overcame the inaccurate location of the primary echo, which was caused by the anisotropic ultrasound propagation and heterogeneous stems. First of all, the improved algorithm was analyzed and its accuracy was verified by a set of simulated signals. Then, a set of cutting samples from stems were taken for ultrasonic detection in the process of water absorption. The correlation between the moisture content of stems and ultrasonic velocities was computed with the algorithm. It was found that the average correlation coefficient of the two parameters reached about 0.98. Finally, living sunflowers with different soil moistures were subjected to ultrasonic detection from 9:00 to 18:00 in situ. The results showed that the soil moisture and the primary ultrasonic echo position had a positive correlation, especially from 12:00 to 18:00; the average coefficient was 0.92. Meanwhile, our results showed that the ultrasonic detection of sunflower stems with different soil moistures was significantly distinct. Therefore, the improved AIC algorithm provided a method to effectively compute the primary echo position of limbs to help detect water changes in stems in situ.

Plant growth is closely related to the structure of its stem. The ultrasonic echo signal of the plant stem carries much information on the stem structure, providing an effective means for analyzing stem structure characteristics. In this paper, we proposed to extract energy features of ultrasonic echo signals to study the structure of the plant stem. Firstly, it is found that there are obvious different ultrasonic energy changes in different kinds of plant stems whether in the time domain or the frequency domain. Then, we proposed a feature extraction method, density energy feature, to better depict the interspecific differences of the plant stems. In order to evaluate the extracted 24-dimensional features of the ultrasound, the information gain method and correlation evaluation method were adopted to compute their contributions. The results showed that the mean density, an improved feature, was the most significant contributing feature in the four living plant stems. Finally, the top three features in the feature contribution were selected, and each two of them composed as 2-D feature maps, which have significant differentiation of the stem species, especially for grass and wood stems. The above research shows that the ultrasonic energy features of plant stems can provide a new perspective for the study of distinguishing the structural differences among plant stem species.

The Location-Routing Problem (LRP) becomes a more intricate subject when the limits of capacities of vehicles and warehouses are considered, which is an NP-hard problem. Moreover, as the number of vehicles increases, the solution to LRP is exacerbated because of the complexity of transportation and the combination of routes. To solve the problem, this paper proposed a Discrete Assembly Combination-Delivery (DACA) strategy based on, the Binary Equilibrium Optimizer (BiEO) algorithm, in addition, this paper also proposes a mixed-integer linear programming model for the problem of this paper. Our primary objective is to address both the route optimization problem and the assembly group sum problem concurrently. Our BiEO algorithm was designed as discrete in decision space to meet the requirements of the LRP represented by the DACA strategy catering to the multi-vehicle LRP scenario. The efficacy of the BiEO algorithm with the DACA strategy is demonstrated. through empirical analysis utilizing authentic data from Changchun City, China, Remarkably, the experiments reveal that the BiEO algorithm outperforms conventional methods, specifically GA, PSO, and DE algorithms, resulting in reduced costs. Notably, the results show the DACA strategy enables the simultaneous optimization of the LRP and the vehicle routing problem (VRP), ultimately leading to cost reduction. This innovative algorithm proficiently tackles both the assembly group sum and route optimization problems intrinsic to multi-level LRP instances.

Ultrasound is widely used in medical and engineering inspections due to its non-destructive and easy-to-use characteristics. However, the complex internal structure of plant stems presents challenges for ultrasound testing. The density and thickness differences in various types of stems can cause different attenuation of ultrasonic signal propagation and the formation of different echo locations. To detect structural changes in plant stems, it is crucial to acquire complete ultrasonic echo RF signals. However, there is currently no dedicated ultrasonic RF detection equipment for plant stems, and some ultrasonic acquisition equipment has limited memory capacity that cannot store a complete echo signal. To address this problem, this paper proposes a double-layer multiple-timing trigger method, which can store multiple trigger sampling memories to meet the sampling needs of different plant stems with different ultrasonic echo locations. The method was tested in experiments and found to be effective in acquiring complete ultrasonic RF echo signals for plant stems. This approach has practical significance for the ultrasonic detection of plant stems.