The article analyzes the total cost of ownership (TCO) of 5G fronthauling solutions based on analog and digital radio-over-fiber (RoF) architectures in cloud radio access networks (C-RANs). The capital and operational expenditures (CAPEX, OPEX) are assessed, for a 10-year period, considering three different RoF techniques: intermediate frequency analog RoF (IF-A-RoF), digital signal processing (DSP) assisted analog RoF (DSP-A-RoF), and digital RoF (D-RoF) based on the common public radio interface (CPRI) specifications. The greenfield deployment scenario under exam includes both fiber trenching (FT) and fiber leasing (FL) options. The TCO is assessed while varying (i) the number of aggregated subcarriers, (ii) the number of three-sector antennas located at the base station, and (iii) the mean fiber-hop length. The comparison highlights the significance that subcarrier aggregation has on the cost efficiency of the analog RoF solutions. In addition, the analysis details the contribution of each cost category to the overall CAPEX and OPEX values. The obtained results indicate that subcarrier aggregation via DSP results in high cost efficiency for a mobile fronthaul network, while a CPRI-based architecture together with FL brings the highest OPEX value.
In this paper, we describe an efficient method for monitoring fiber links utilizing sub-carrier multiplexing. By assigning a void sub-carrier frequency band for monitoring purposes, the method reuses the data transmitter without any impact on data transmission and provides capability of in-service reflectometry measurements of fiber optic lines with 10-m spatial resolution and 1.0-dB fault detection sensitivity. Its promising properties and performance enable potential application in emerging networks such as relatively short distance analogue mobile fronthaul.
26 June 2018 in IEEE Communications Surveys & Tutorials
Radio access networks must evolve to meet future communication requirements. One of the development directions is the future radio base station architecture and its functional splits. The very last connectivity segment to a simple antenna unit is analogue in nature and, to centralize the important and expensive radio access network resources, one would potentially want to extend it to several kilometers. This sort of requirement calls for development of new fiber-based transport technologies with strong emphasis on reach improvement, bandwidth efficiency, and link reliability. With regards to the later aspect, efficient monitoring of physical links would become essential. It should provide rapid and detailed in-service link quality assessment and troubleshooting while imposing minor additional costs and preserving signal integrity. While link monitoring possibilities in baseband transmission for backhaul or digital radio over fiber for fronthaul have been extensively studied, the analogue radio over fiber transmission brings opportunities for application of novel and potentially more efficient transceiver-embedded techniques. It is the objective of this paper to emphasize the critical importance of analogue radio over fiber link monitoring in the era of rapidly developing mobile communications. Our aim in this communication is to define requirements, which an efficient monitoring solution is expected to satisfy, and provide an overview of recent developments. It is assumed that the readers possess general knowledge of fiber optic transmission, reflectometry, passive optical networks and are familiar with various optical components. Set of selected references is provided for those willing to deepen their knowledge of aspects addressed in this paper.
14 October 2013 in Journal of Optical Communications and Networking
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We present a monitoring technique that can be directly integrated in the sub-carrier multiplexing (SCM) transceiver for PtP and wavelength division multiplexing and sub-carrier multiplexing passive optical networks applications. The technique is based on the detection of the backscattered signal from a baseband tone (100 Hz to 100 kHz) and interpretation with the least absolute shrinkage and selection operator (LASSO) operator, a signal processing technique which identifies the fault positions based on the mathematical model of the received signal. The proposed single-ended fiber probing method enables the location of multiple faults with no a-priori knowledge of the fiber, and offers low-cost in-service operation with negligible impact on data transmission, few meters spatial resolution, and limited dynamic range. Due to all its advantages, but also considering its reach limitation, the SincLASSO method features as an ideal monitoring candidate for short reach sub-carrier multiplexed optical fiber networks, such as the ones intended for analog mobile Fronthaul based on fiber and fiber-extended copper lines.
We present a monitoring technique that can be directly integrated in the transceiver for WDM/SCM-PON applications. It is based on the detection of the backscattered signal from a baseband tone and interpretation with the LASSO operator for multiple fault detection.