This review was presented on the 34 Conference of the International Committee on Aeronautical Fatigue and Structural Integrity, Helsinki, Finland, June 1-2, 2015. It contains description of main works and investigations in fatigue of aircraft structures performed in Poland during the years 2013 and 2014.
This paper deals with the problem of calculation of Stress Intensity Factor in two ways: theoretically and numerically with two methods: Virtual Crack Closure Technique and J – Integral method. Three types of geometries were considered: plates with central/boundary crack and notch bending specimen. Numerical simulations covered a mesh sensitivity study for three mesh sizes and linear/nonlinear material model. Good correlation between exact solution and numerical tests was achieved.
The following article describes the Full Scale Fatigue Test of the Su-22 UM3K fighter-bomber. The test was carried out due to the decision of the Polish Ministry of Defense to prolong the service life for this type of aircraft. Within the article authors present the main goals of the test as well as main assumptions and simplifications which had to be done due to time and cost limitations. Furthermore the preparation and progress of each stage is described. Final section includes selected results and final remarks.
Within the following article authors present the methodology for estimating crack propagation within the PZL-130 TC-II trainer aircraft structure. The considered crack initiated in the starboard of the fuselage near the canopy lock mechanism mounting holes during the Full Scale Fatigue Test (FSFT) and was discovered during a Non Destructive Investigation (NDI). The main goal of the presented work was to determine the crack propagation curve taking into account the geometry of the damaged element as well as the adjacent structure, material properties and the actual load spectrum used during the FSFT. Obtained curve was used to estimate safe NDI intervals during operation. Authors present results only for the considered damage, however identical methodology was used for other nine Critical Points (CP) determined during the FSFT.