Yubin Zhang

Dr. Yubin Zhang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2021 in RSC Advances
Verified
Journal Article
Open access
PDF file
YNYanli Nan
Yanli Nan
YHYuanyuan He
Yuanyuan He
ZZZihan Zhang
Zihan Zhang
JWJian Wei
Jian Wei
YZYubin Zhang
Yubin Zhang
The development of efficient, cost-effective and stable N-doped carbon material with catalytic activity as an excellent catalyst for the oxygen evolution reaction (OER) is critical for renewable energy systems. In this study, the unique tip-half-closed N-doped carbon nanohorns (THC-N-CNHs) were firstly produced by the positive pressure-assisted arc discharge method using N2 as the nitrogen source. Benefitting from the novel tip-half-closed structure and sufficient porosity, the specific surface area (SSA) of THC-N-CNHs is calculated to be 670 m2 g−1 without any further treatment, which is three times larger than that of traditional tip-closed CNHs. More importantly, the content of nitrogen can achieve ∼1.98 at% with noticeable pyridinic-N enrichment, increasing the number of active sites for the OER. Furthermore, the three-dimensional spherical feature and the unique pore structure for THC-N-CNHs lead to the fast transportation of electrons, and facile release of the evolved O2 bubbles during the OER process. Therefore, THC-N-CNHs exhibit excellent electrocatalytic activity toward the OER, with an overpotential of 328 mV at 10 mA cm−2, which is superior to that of most N-doped carbon material-based electrocatalysts. Meanwhile, the resulting catalyst also shows excellent durability after long-term cycling. Finally, we emphasize that THC-N-CNHs can be promising candidates as cheap, industrially scalable catalytic scaffolds for OER application.

7 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
YZYubin Zhang
Yubin Zhang
JDJun Du
Jun Du
WHWang Huafeng
Wang Huafeng
HLHua Li
Hua Li
XZXiaoyun Zhao
Xiaoyun Zhao
A transient three-dimensional (3D) numerical model was established to illustrate the heat transfer, fluid flow and particle migration behaviors in the molten pool during TIG-assisted droplet deposition manufacturing (DDM) of SiC particle-reinforced aluminum matrix composites (AMCs). The effect of temperature-dependent physical properties and the interaction between the SiC reinforcement and the liquid metal matrix were considered. A double-ellipsoidal volumetric heat source model was adopted to simulate the energy interactions between the pulse square-wave variable polarity TIG welding arc and the moving substrate. Free surface fluctuations of molten pool due to arc force and sequential droplet impact are calculated with volume of fluid (VOF) method in a fixed Eulerian structured mesh. The numerical model, capable of capturing the impact, simultaneous spread, and phase change of the droplets as well as the motion trajectory and terminate distribution state of the reinforcement particles, is key tool to understand the formation mechanism of the TIG-assisted DDM of SiC particle-reinforced AMCs. The numerical model was validated by the metallographic observations, and the calculated particle distribution and solidification morphology of deposited layer agree well with the experimental measurements.

4 August 2026 in Lubricants
Verified
Journal Article
Open access
PDF file
YZYubin Zhang
Yubin Zhang
JQJunan Qian
Junan Qian
FWFengtao Wang
Fengtao Wang
CYChunlan Yu
Chunlan Yu
BKBolan Kong
Bolan Kong
XZXiaoyun Zhao
Xiaoyun Zhao
To address lubricant film oscillation and rotor whirl instability caused by unreasonable bearing configurations in X-ray tubes, this study systematically investigated the dynamic performance of asymmetrically distributed herringbone-groove journal bearings lubricated with gallium-based liquid metal. On the basis of hydrodynamic lubrication theory and turbulence effects, an unsteady dynamic Reynolds equation and a perturbation pressure differential equation are established. The physical definitions and coordinate transformation relationships of the lubricant film stiffness and damping coefficients are clarified. Comparative analyses of symmetric and asymmetric bearing structures are conducted on the COMSOL Multiphysics platform under varying eccentricities, rotational speeds, bearing clearances, and groove depths. Compared with the symmetric design, the asymmetric structure generates a significantly higher damping peak in the medium-to-high eccentricity range, achieving an optimal combination of high stiffness and moderate damping. A stable, directional, high-pressure zone can form at zero eccentricity, which actively guides the lubricant to establish a steady hydrodynamic film under misaligned operating conditions. This study provides theoretical support for the optimal design of high-speed bearing systems.

25 August 2026 in Materials
Verified
Journal Article
Open access
PDF file
YZYubin Zhang
Yubin Zhang
HZHuomei Zhu
Huomei Zhu
XZXiaoyun Zhao
Xiaoyun Zhao
ZLZhiqiang Li
Zhiqiang Li
JDJun Du
Jun Du
Steel/tin bimetallic components fabricated using traditional casting processes have inherent drawbacks, including complicated preparation procedures and a relatively low interfacial bonding strength. To efficiently create metallurgical composite steel/tin bimetallic structures under complex service conditions, we utilized TIG-based additive manufacturing with front wire feeding to prepare the components. The effects of the substrate inclination angle on the macroscopic morphology of the deposited layer, interfacial phase composition, the growth behavior of intermetallic compounds (IMCs) at the bimetallic interfaces, and interfacial mechanical properties were investigated. Our results show that macro-structural defects like cracks, voids and pores were not observed at the steel/tin interfaces. The grains of the interface IMCs were mainly composed of Fe3Sn, FeSn2 and FeSb2 phases; Fe-rich microspheres were dispersed inside the deposited tin layer. Under horizontal substrate conditions, deposited layer morphology and IMC layer thickness presented symmetric distributions. When the inclination angle of the substrate reached 30°, the deposited layers exhibited an asymmetric teardrop morphology, resulting in an increased layer height and width and penetration depth. Meanwhile, tin alloy grains were significantly refined; more high-angle grain boundaries (HAGBs) were formed at the spreading fronts of molten droplets. Tin alloy hardness was improved via synergistic dispersion and grain boundary strengthening. This work reveals the inclination–morphology–microstructure–property correlation, fills the research gap in inclined substrate arc additive manufacturing of steel/tin bimetals, and provides a theoretical foundation for engineering applications.

24 June 2026 in Agriculture
Verified
Journal Article
Open access
PDF file
Weibing JiaWeibing Jia
Weibing Jia
SLSicun Lin
Sicun Lin
ZWZhengying Wei
Zhengying Wei
BTBeibei Tian
Beibei Tian
XMXingchen Meng
Xingchen Meng
YZYubin Zhang
Yubin Zhang
Rapid and non-destructive detection of nitrogen content in greenhouse cucumber leaves is essential for precision fertilization, yet traditional chemical methods are destructive and time-consuming, and existing spectral technologies suffer from high cost and poor field adaptability. This study aims to propose a high-precision detection scheme for cucumber leaf nitrogen content based on a lightweight model, suitable for complex scenarios. A total of 698 cucumber leaf images covering three growth stages were collected to build a segmentation dataset. Four categories and eight types of deep learning segmentation models were optimized and compared, and the optimal one was selected to extract leaf regions. Nine color features were extracted and combined with Kjeldahl-measured nitrogen content to construct and optimize three machine learning models, forming a deep learning segmentation–color feature extraction–machine learning prediction process. The results showed that YOLOv11n achieved the best segmentation accuracy, with an IoU of 0.9212 and AP of 0.9998 for high-resolution images. The optimized XGBoost had the highest prediction accuracy, with an MAE of 0.469, MSE of 0.461, and RMSE of 0.679, which are 10.15%, 8.71%, and 4.36% lower than Support Vector Regression with Radial Basis Function kernel (SVR_RBF) respectively, and its predicted nitrogen content aligned well with true values. The proposed scheme integrating YOLOv11n and XGBoost offers a lightweight technical solution for nitrogen nutrition diagnosis and precise fertilization of greenhouse cucumbers.

10 February 2026 in Lubricants
Verified
Journal Article
Open access
PDF file
YZYubin Zhang
Yubin Zhang
FWFengtao Wang
Fengtao Wang
CYChunlan Yu
Chunlan Yu
HZHuomei Zhu
Huomei Zhu
XZXiaoyun Zhao
Xiaoyun Zhao
Misalignment of the herringbone groove radial bearing can lead to changes in performance and system abnormalities. To investigate the effects of different misalignment modes and magnitudes on the HGJB-rotor system, a coupled dynamic model was established. Based on this model, the influences of parallel misalignment and angular misalignment on bearing performance were analyzed, and the variation law of rotor vibration was revealed. The results indicate that the rotor motion trajectory and bearing dynamic coefficients (including critical journal mass and critical whirl frequency) exhibit time-varying characteristics. Specifically, compared with the aligned condition, a parallel misalignment of δ = 8.0 × 10−6 m reduces the relative film thickness by 17.8% and increases the maximum film pressure by 1.85%. Meanwhile, an angular misalignment of θ0 = 8.0 × 10−4 rad results in a 45.9% reduction in relative film thickness and a 33.1% increase in maximum film pressure. Additionally, the increased misalignment magnitude enhances the rotor vibration amplitude significantly. For instance, the Y-direction displacement amplitude increases by 59.4% under the maximum parallel misalignment. Moreover, the misalignment also alters the axial trajectory of the rotor. Overall, different misalignment modes and magnitudes exert significant effects on the rotor vibration characteristics. The research findings provide theoretical support and technical references for the further development and engineering application of HGJBs.