For the maintenance of railways on soft soils, accurate knowledge of the subsoil conditions is essential. Soft soils at shallow depths have high variability; thus, high spatial resolution is required. Spare telecommunication fiber-optic cables, known as dark fiber, can be used as an array of sensors to measure waves generated by running trains, which offers a unique opportunity to characterize shallow soils at high spatial resolution. We used dark fiber to measure seismic waves generated by running trains and implemented a seismic interferometry technique to retrieve surface waves. We evaluated the reliability of selected parts of the recorded signals split as bow waves (the train approaching the fiber), train waves (the train passing alongside the fiber), and tail waves (the train leaving the fiber) to retrieve broad-band surface waves. The analysis was performed in two distinctive zones. Zone I consists of a thick–soft (2.0–6.0 m thickness) layer, and Zone II consists of a thin–soft (less than 2.0 m thickness) layer, both overlaying a “stiffer” sand layer. At Zone I, train waves yielded the best results in revealing the thick–soft layer. At Zone II, the bow waves yielded clear high-frequency energy, revealing the overall soil structure but without identifying the shallow thin–soft layer.
22 September 2026 in International Journal of Physical Modelling in Geotechnics
This paper presents a series of geotechnical centrifuge experiments on embankments founded on soft clay, focusing on load transfer, pore pressure response, and deformation mechanisms. Eight heavily instrumented tests were conducted with systematic variation in clay stiffness, embankment geometry, and loading conditions. The models were constructed on consolidated kaolinite clay beds and loaded under displacement control beyond peak resistance, with both constant and variable loading rates. Loading was applied with a vertical and rotational degree of freedom to allow redistribution during deformation. Global response was measured in terms of load–displacement behaviour, plate rotation, pore water pressures, total pressures, and displacements in the ditch and free-field, while in-flight T-bar tests characterised clay strength. Full-field displacements and strains were obtained using particle image velocimetry, applied separately to the embankment and clay foundation. Post-test three-dimensional surface scans documented final geometry and failure configuration. The observed deformation evolves from a vertical punching response at peak resistance to a progressive asymmetric wedge mechanism in the clay foundation during post-peak loading. The combined measurements provide a consistent experimental dataset describing load transfer, deformation patterns, and failure development, intended as a reference basis for future interpretation and modelling.
ProRail, the Dutch infrastructural manager of 7,000 km track on ~3,000 km of railway embankments, initiated a project focussed on railway embankment stability. Although most of these embankments were constructed over a hundred years ago and still function effectively, recent calculations revealed concerns regarding their stability. To ensure safe future use of the embankments, it has been determined that any modifications to the tracks or embankments must be preceded by thorough investigations. At the start of the project in 2020, predictions were made regarding increased future usage of the Dutch railway tracks. Combined with the impacts of climate change, this led ProRail to recognise the necessity of gaining a better understanding of railway embankment stability. Unfortunately, the available information regarding the subsurface and embankments was limited, demanding a novel approach to investigate all embankment slopes in a cost-effective way. Therefore, the Stochastic Subsoil Schematisation (SSS) approach was deployed for characterising and parameterising embankment composition and natural subsurface. This approach was combined with an automated workflow to assess slope stability.In the Netherlands, a wide range of geospatial data is available such as geological maps, ground elevation information, Cone Penetration Test data, borehole records and groundwater table measurements. This data served as the foundation for the SSS-procedure. Multiple subsoil scenarios were developed per segment, with stability calculations for each embankment slope conducted in D-Stability and automated using Python. With this, the stability of the ~3,000 km of railway embankment could be estimated, and the results were visualised in Geographic Information System (GIS) for clear presentation.