Disinfection of surfaces with various functional purposes is a relevant measure for the inactivation of microorganisms and viruses. This procedure is used almost universally, from water treatment facilities to medical institutions and public spaces. Some of the most common disinfectants the World Health Organization recommends are chlorine-containing compounds. Sodium and calcium hypochlorites are only used for disinfection of the internal surfaces of water treatment facilities. However, it is known that ozone is a more powerful oxidizing agent. This study compares the effectiveness of inactivating yeast-like fungi Candida albicans, Gram-positive Bacillus subtilis, and Gram-negative bacteria Escherichia coli with aqueous ozone and sodium hypochlorite solutions. This study used ozone solutions in water with a concentration of 0.5–1.5 mg/L and sodium hypochlorite solutions with an active chlorine concentration of 50–150 mg/L. Steel and polymeric plates were used as substrates. Comparison of the CT (concentration by time) criterion at the ratio of LD50 in NaClO to ozonated water shows that the smallest difference, around 100 times, was observed in the inactivation of Candida albicans. The maximum difference is up to 230 times in the inactivation of Bacillus subtilis.
Various iron oxides have been proven to be promising anode materials for metal-ion batteries due to their natural abundance, high theoretical capacity, ease of preparation, and environmental friendliness. However, the synthesis of iron oxide-based composites requires complex approaches, especially when it comes to composites with intrinsically conductive polymers. In this work, we propose a one-step microplasma synthesis of polyaniline-coated urchin-like FeOOH nanoparticles (FeOOH/PANI) for applications as anodes in lithium-ion batteries. The material shows excellent electrochemical properties, providing an initial capacity of ca. 1600 mA∙h∙g−1 at 0.05 A∙g−1 and 900 mA∙g−1 at 1.2 A∙g−1. Further cycling led to a capacity decrease to 150 mA∙h∙g−1 by the 60th cycle, followed by a recovery that maintained the capacity at 767 mA∙h∙g−1 after 2000 cycles at 1.2 A∙g−1 and restored the full initial capacity of 1600 mA∙h∙g−1 at a low current density of 0.05 A∙g−1. Electrochemical milling—the phenomenon we confirmed via a combination of physico-chemical and electrochemical techniques—caused the material to exhibit interesting behavior. The anodes also exhibited high performance in a full cell with NMC532, which provided an energy density of 224 Wh∙kg−1, comparable to the reference cell with a graphite anode (264 Wh∙kg−1).
29 June 2023 in Herald of Polotsk State University. Series F. Civil engineering. Applied sciences
Дезинфекция поверхностей является актуальной мерой для инактивации микроорганизмов и вирусов. Данная процедура используется практически повсеместно, от сооружений водоподготовки до медицинских учреждений и общественных объектов. Недостатком этих мер является усиление коррозии контактных поверхностей, часто выполненных из нержавеющих сталей, сопровождающееся вымыванием тяжелых металлов из них. Согласно рекомендациям ВОЗ, наибольшее количество дезинфицирующих веществ представляет собой растворы гипохлоритов. В статье исследовано коррозионное воздействие дезинфицирующих веществ на нержавеющие стали трехсотой серии. Для исследований использовали хлорсодержащие растворы в концентрации 2 мас.% в пересчете на гипохлорит ион и насыщенную озоном воду в качестве альтернативного варианта дезинфицирующего раствора. Результаты исследований показали, что наибольшее коррозионное воздействие на исследуемые нержавеющие стали оказывают растворы гипохлорита натрия и гипохлорита кальция. При этом наибольшее вымывание металлов из исследуемых сталей происходит при использовании раствора гипохлорита кальция. Использование насыщенной озоном воды не приводит к вымыванию тяжелых металлов из всех исследуемых сталей.
Various iron oxides have been proven to be promising anode materials for metal-ion batteries due to their natural abundance, high theoretical capacity, ease of preparation, and environmental friendliness. However, the synthesis of iron oxide-based composites requires complex approaches, especially when it comes to composites with intrinsically conductive polymers. In this work we propose a one-step microplasma synthesis of a polyaniline-coated urchin-like FeOOH nanoparticles (FeOOH/PANI) for application as anode in lithium-ion batteries. The material shows excellent electrochemical characteristics, providing initial capacity of ca. 1600 mA∙h∙g−1 at 0.05 A∙g−1 and 900 mA∙g−1 at 1.2 A∙g−1. Further cycling lead to capacity decrease to 150 mA∙h∙g−1 by the 60th cycles, followed by a recovery that maintained the capacity at 767 mA∙h∙g−1 after 2000 cycles at 1.2 A∙g−1 and restored full initial capacity of 1600 mA∙h∙g−1 at low current density of 0.05 A∙g−1. Electrochemical milling of the material caused such interesting behavior of the material, and we confirmed this phenomenon by a combination of physico-chemical and electrochemical techniques. The anodes also exhibit high performance in a full cell with NMC532. NMC532//FeOOH/PANI full cell provided energy density of 224 Wh∙kg−1 which is comparable to the reference cell with graphite anode (264 Wh∙kg−1).
26 September 2025 in Journal of Material Cycles and Waste Management