Estimating forest structural attributes of planted forests plays a key role in managing forest resources, monitoring carbon stocks, and mitigating climate change. High-resolution and low-cost remote-sensing data are increasingly available to measure three-dimensional (3D) canopy structure and model forest structural attributes. In this study, we compared two suites of point cloud metrics and the accuracies of predictive models of forest structural attributes using unmanned aerial vehicle (UAV) light detection and ranging (LiDAR) and digital aerial photogrammetry (DAP) data, in a subtropical coastal planted forest of East China. A comparison between UAV-LiDAR and UAV-DAP metrics was performed across plots among different tree species, heights, and stem densities. The results showed that a higher similarity between the UAV-LiDAR and UAV-DAP metrics appeared in the dawn redwood plots with greater height and lower stem density. The comparison between the UAV-LiDAR and DAP metrics showed that the metrics of the upper percentiles (r for dawn redwood = 0.95–0.96, poplar = 0.94–0.95) showed a stronger correlation than the lower percentiles (r = 0.92–0.93, 0.90–0.92), whereas the metrics of upper canopy return density (r = 0.21–0.24, 0.14–0.15) showed a weaker correlation than those of lower canopy return density (r = 0.32–0.68, 0.31–0.52). The Weibull α parameter indicated a higher correlation (r = 0.70–0.72) than that of the Weibull β parameter (r = 0.07–0.60) for both dawn redwood and poplar plots. The accuracies of UAV-LiDAR (adjusted (Adj)R² = 0.58–0.91, relative root-mean-square error (rRMSE) = 9.03%–24.29%) predicted forest structural attributes were higher than UAV-DAP (Adj-R² = 0.52–0.83, rRMSE = 12.20%–25.84%). In addition, by comparing the forest structural attributes between UAV-LiDAR and UAV-DAP predictive models, the greatest difference was found for volume (ΔAdj-R² = 0.09, ΔrRMSE = 4.20%), whereas the lowest difference was for basal area (ΔAdj-R² = 0.03, ΔrRMSE = 0.86%). This study proved that the UAV-DAP data are useful and comparable to LiDAR for forest inventory and sustainable forest management in planted forests, by providing accurate estimations of forest structural attributes.

Accurate classification of tree-species is essential for sustainably managing forest resources and effectively monitoring species diversity. In this study, we used simultaneously acquired hyperspectral and LiDAR data from LiCHy (Hyperspectral, LiDAR and CCD) airborne system to classify tree-species in subtropical forests of southeast China. First, each individual tree crown was extracted using the LiDAR data by a point cloud segmentation algorithm (PCS) and the sunlit portion of each crown was selected using the hyperspectral data. Second, different suites of hyperspectral and LiDAR metrics were extracted and selected by the indices of Principal Component Analysis (PCA) and the mean decrease in Gini index (MDG) from Random Forest (RF). Finally, both hyperspectral metrics (based on whole crown and sunlit crown) and LiDAR metrics were assessed and used as inputs to Random Forest classifier to discriminate five tree-species at two levels of classification. The results showed that the tree delineation approach (point cloud segmentation algorithm) was suitable for detecting individual tree in this study (overall accuracy = 82.9%). The classification approach provided a relatively high accuracy (overall accuracy > 85.4%) for classifying five tree-species in the study site. The classification using both hyperspectral and LiDAR metrics resulted in higher accuracies than only hyperspectral metrics (the improvement of overall accuracies = 0.4–5.6%). In addition, compared with the classification using whole crown metrics (overall accuracies = 85.4–89.3%), using sunlit crown metrics (overall accuracies = 87.1–91.5%) improved the overall accuracies of 2.3%. The results also suggested that fewer of the most important metrics can be used to classify tree-species effectively (overall accuracies = 85.8–91.0%).

Canopy cover is a key forest structural parameter that is commonly used in forest inventory, sustainable forest management and maintaining ecosystem services. Recently, much attention has been paid to the use of unmanned aerial vehicle (UAV)-based light detection and ranging (LiDAR) due to the flexibility, convenience, and high point density advantages of this method. In this study, we used UAV-based LiDAR data with individual tree segmentation-based method (ITSM), canopy height model-based method (CHMM), and a statistical model method (SMM) with LiDAR metrics to estimate the canopy cover of a pure ginkgo (Ginkgo biloba L.) planted forest in China. First, each individual tree within the plot was segmented using watershed, polynomial fitting, individual tree crown segmentation (ITCS) and point cloud segmentation (PCS) algorithms, and the canopy cover was calculated using the segmented individual tree crown (ITSM). Second, the CHM-based method, which was based on the CHM height threshold, was used to estimate the canopy cover in each plot. Third, the canopy cover was estimated using the multiple linear regression (MLR) model and assessed by leave-one-out cross validation. Finally, the performance of three canopy cover estimation methods was evaluated and compared by the canopy cover from the field data. The results demonstrated that, the PCS algorithm had the highest accuracy (F = 0.83), followed by the ITCS (F = 0.82) and watershed (F = 0.79) algorithms; the polynomial fitting algorithm had the lowest accuracy (F = 0.77). In the sensitivity analysis, the three CHM-based algorithms (i.e., watershed, polynomial fitting and ITCS) had the highest accuracy when the CHM resolution was 0.5 m, and the PCS algorithm had the highest accuracy when the distance threshold was 2 m. In addition, the ITSM had the highest accuracy in estimation of canopy cover (R² = 0.92, rRMSE = 3.5%), followed by the CHMM (R² = 0.94, rRMSE = 5.4%), and the SMM had a relative low accuracy (R² = 0.80, rRMSE = 5.9%).The UAV-based LiDAR data can be effectively used in individual tree crown segmentation and canopy cover estimation at plot-level, and CC estimation methods can provide references for forest inventory, sustainable management and ecosystem assessment.

Forest structural attributes are key indicators for parameterization of forest growth models, which play key roles in understanding the biophysical processes and function of the forest ecosystem. In this study, UAS-based multispectral and RGB imageries were used to estimate forest structural attributes in planted subtropical forests. The point clouds were generated from multispectral and RGB imageries using the digital aerial photogrammetry (DAP) approach. Different suits of spectral and structural metrics (i.e., wide-band spectral indices and point cloud metrics) derived from multispectral and RGB imageries were compared and assessed. The selected spectral and structural metrics were used to fit partial least squares (PLS) regression models individually and in combination to estimate forest structural attributes (i.e., Lorey’s mean height (H_L) and volume(V)), and the capabilities of multispectral- and RGB-derived spectral and structural metrics in predicting forest structural attributes in various stem density forests were assessed and compared. The results indicated that the derived DAP point clouds had perfect visual effects and that most of the structural metrics extracted from the multispectral DAP point cloud were highly correlated with the metrics derived from the RGB DAP point cloud (R² > 0.75). Although the models including only spectral indices had the capability to predict forest structural attributes with relatively high accuracies (R² = 0.56–0.69, relative Root-Mean-Square-Error (RMSE) = 10.88–21.92%), the models with spectral and structural metrics had higher accuracies (R² = 0.82–0.93, relative RMSE = 4.60–14.17%). Moreover, the models fitted using multispectral- and RGB-derived metrics had similar accuracies (∆R² = 0–0.02, ∆ relative RMSE = 0.18–0.44%). In addition, the combo models fitted with stratified sample plots had relatively higher accuracies than those fitted with all of the sample plots (∆R² = 0–0.07, ∆ relative RMSE = 0.49–3.08%), and the accuracies increased with increasing stem density.

Ginkgo (Ginkgo biloba L.) is not only considered a ‘living fossil’, but also has important ecological, economic, and medicinal values. However, the impact of climate change on the performance and distribution of this plant is an increasing concern. In this study, we developed a bioclimatic model based on data about the occurrence of ginkgo from 277 locations, and validated model predictions using a wide-ranging field test (12 test sites, located at the areas from 22.49° N to 39.32° N, and 81.11° E to 123.53° E). We found that the degree-days below zero were the most important climate variable determining ginkgo distribution. Based on the model predictions, we classified the habitat suitability for ginkgo into four categories (high, medium, low, and unsuitable), accounting for 9.29%, 6.09%, 8.46%, and 76.16% of China’s land area, respectively. The ANOVA results of the validation test showed significant differences in observed leaf-traits among the four habitat types (p < 0.05), and importantly the rankings of the leaf traits were consistent with our classification of the habitat suitability, suggesting the effectiveness of our classification in terms of biological and economic significance. In addition, we projected that suitable (high and medium) habitats for ginkgo would shrink and shift northward under both the RCP4.5 and RCP8.5 climate change scenarios for three future periods (the 2020s, 2050s, and 2080s). However, the area of low-suitable habitat would increase, resulting in a slight decrease in unsuitable habitats. Our findings contribute to a better understanding of climate change impact on this plant and provide a scientific basis for developing adaptive strategies for future climate.

Developing an accurate model for estimating the forest structural parameters of planted forests is crucial for forest productivity predictions and can provide a better understanding of the carbon cycle under climate change. Unmanned aerial vehicle-light detecting and ranging (UAV-LiDAR) systems represents a promising active remote sensing technology that has the potential to be used for forest inventories. In addition, the process-based model, physiological principles predicting growth (3-PG), which is based on physiological principles and environmental factors, has been applied to estimate the growth of even-aged, mono-specific forests under the effect of different management levels, site conditions, and climate change. In this study, the performance of UAV-LiDAR metrics was assessed and applied to estimate forest structural parameters using a multivariate linear regression (MLR) method. The 3-PG was parameterized and used to simulate the diameter at breast height, stem density, volume and above-ground biomass of a planted ginkgo forest in eastern China. In addition, a sensitivity analysis was conducted on the 3-PG model's input parameters. The results demonstrated that both the MLR based on UAV-LiDAR data and a progress model of the 3-PG have a promising potential for estimating forest structural parameters (R2 > 0.70, relative root squared error >20%). A sensitivity analysis of the 3-PG parameters also confirmed that the parameter “age at canopy cover” (fullCanAge) is vital for the 3-PG model, and positively correlation with the simulated results. The method presented here represents an improvement on traditional methods for estimating forest structural parameters because it more explicitly accounts for climatic effects included in the 3-PG model.