This work proposes positive- and negative-sequence equivalent circuits of grid-forming inverters for steady-state analysis. The proposed models are especially attractive for performing long-duration voltage regulation analysis and short-circuit studies involving grid-forming inverters. Our proposed equivalent circuit models are based on the inverter’s voltage and current control loops in the $\alpha \beta $ and dq frames. For this reason, they operate according to prescribed control functions and specified impedances ( i.e. , filter impedance, current limiter block, virtual admittance block, and PI/PR controller block). The equivalent circuit model accuracy is validated by comparing system steady-state voltage and current responses obtained by detailed time-domain models in PSCAD/EMTDC to those by the equivalent circuit models implemented in steady-state load flow program ( e.g. , OpenDSS). Two distinct control structures implemented in the $\alpha \beta $ and dq frames are used for the validation. Single line-to-ground and line-to-line-to-ground faults are simulated in a small islanded microgrid as well as the IEEE 34-node test feeder. Fault impedances varying from 0 to 5 ohms are simulated. We show that the equivalent models precisely replicate the steady-state response of the detailed time-domain models.
24 February 2021 in IEEE Open Access Journal of Power and Energy
Recent advances in inverter-based distributed energy resources (DERs) allow microgrids to operate in grid-connected and islanded modes with ease. However, determining a steady-state load flow solution of a real-world unbalanced and islanded three-phase microgrid remains a challenge. Existing methods are either unsuitable, labor-intensive or computationally demanding for a long-term analysis of islanded microgrids. To address these issues, we propose a practical solution framework that employs externally-updated system frequency, power quantities, and droop characteristics governing the voltage and phase angle of DERs in every iteration as inputs to an off-the-shelf open-source multi-phase, multi-wire, unbalanced power flow software tool to solve an islanded-microgrid power flow. Using our framework, users only need to implement a set of droop equations and update system variables. The power flow solution is accomplished entirely by an off-the-shelf power flow tool, e.g., OpenDSS. Our proposed framework can model a microgrid of any arbitrary configuration and operating condition. We demonstrate and validate the proposed method’s efficacy by comparing its results with those modeled using a time-domain simulation with PSCAD/EMTDC. Finally, an example of a quasi-static time-series study is presented to better illustrate the application of such a tool.
Optimal power flow (OPF) analysis enables the in-depth study and examination of islanded microgrid design and operation. The development of the analysis framework, including modeling, formulating, and selecting effective OPF solvers, however, is a nontrivial task. As a result, this paper presents a tutorial on an OPF modeling framework, offering a mathematical model that can be readily implemented using established open-source software tools such as OpenDSS, Pyomo, and IPOPT. The framework is versatile, capable of representing single-phase and unbalanced three-phase islanded microgrids. Various inverter models, such as those of grid forming and following equipped with their operating characteristics, can be incorporated. The efficacy of the proposed framework is demonstrated in studying the OPF of single-phase and three-phase microgrids.