SnSe doped a different way: Heat can be converted into electricity by thermoelectric materials. Such materials are promising for use in solid-state cooling devices. A challenge for developing efficient thermoelectric materials is to ensure high electrical but low thermal conductivity. Chang et al. found that bromine doping of tin selenide (SnSe) does just this by maintaining low thermal conductivity in the out-of-plane direction of this layered material. The result is a promising n-type thermoelectric material with electrons as the charge carriers—an important step for developing thermoelectric devices from SnSe. Science , this issue p. 778

BiCuSeO oxyselenides have recently acquired ever-increasing attention and have been extensively studied as very promising thermoelectric materials. The ZT of the BiCuSeO system was significantly increased from 0.5 to 1.4 in the past three years, which indicates that BiCuSeO oxyselenides are robust candidates for energy conversion applications. In this review, we first discuss and summarize the crystal structures, microstructures, electronic structures and physical/chemical properties of BiCuSeO oxyselenides. Then, the approaches that successfully enhanced the thermoelectric performances in the BiCuSeO system are outlined, which include increasing carrier concentration, optimizing Cu vacancies, a simple and facile ball milling method, multifunctional Pb doping, band gap tuning, and increasing carrier mobility through texturing. Theoretical calculations to predict a maximum ZT in the BiCuSeO system are also described. Finally, a discussion of future possible strategies is proposed to aim at further enhancing the thermoelectric figure of merit of these materials.

Lower-cost thermoelectrics: Thermoelectric materials convert heat to electricity, making them attractive for heat harvesting or cooling applications. However, many high-performance thermoelectrics are made of expensive or toxic materials. He et al. found that a material composed of primarily tin and sulfur could be optimized to have relatively good thermoelectric properties. Introducing about 10% selenium to tin sulfide helped tune these properties by electronic band manipulation. This material is a step toward more earth-abundant, less toxic, and lower-cost thermoelectrics than the telluride-based materials currently in use. Science , this issue p. 1418