In this paper, an extensive review of the most up-to-date papers on microwave Doherty power amplifiers is presented. The main applications are discussed, together with the employed semiconductor technologies. The different research trends, all aimed to improve the advantages of the Doherty scheme and to solve its inherent drawbacks, are presented. The first considered topic is the maximization of efficiency and/or linearity, where analog and digital techniques are exploited. Another important trend is the bandwidth enlargement of the Doherty architecture, that involves a large number of papers. Multi-band, multi-mode solutions are also considered, using either fixed or reconfigurable solutions. The final section is dedicated to the most significant Doherty integrated implementations.

We discuss the design, realization and experimental characterization of a GaN-based hybrid Doherty power amplifier for wideband operation in the 3-3.6-GHz frequency range. The design adopts a novel, simple approach based on wideband compensator networks. Second-harmonic tuning is exploited for the main amplifier at the upper limit of the frequency band, thus improving gain equalization over the amplifier bandwidth. The realized amplifier is based on a packaged GaN HEMT and shows, at 6 dB of output power back-off, a drain efficiency higher than 38% in the 3-3.6-GHz band, gain around 10 dB, and maximum power between 43 and 44 dBm, with saturated efficiency between 55% and 66%. With respect to the state of the art, we obtain, at a higher frequency, a wideband amplifier with similar performances in terms of bandwidth, output power, and efficiency, through a simpler approach. Moreover, the measured constant maximum output power of 20 W suggests that the power utilization factor of the 10-W (Class A) GaN HEMT is excellent over the amplifier band.

This paper presents a novel technique for the design of broadband Doherty power amplifiers (DPAs), supported by a simplified approach for the initial bandwidth estimation that requires linear simulations only. The equivalent impedance of the Doherty inverter is determined by the value of the output capacitance of the power device, and the Doherty combiner is designed following this initial choice and using a microstrip network. A GaN-based single-input DPA designed adopting this method exhibits, on a state-of-the-art bandwidth of 87% (1.5-3.8 GHz), a measured output power of around 20 W with 6 dB back-off efficiency between 33% and 55%, with a gain higher than 10 dB. System-level measurements prove the linearizability of the designed Doherty amplifier when a modulated signal is applied.

This paper presents an innovative approach to extend the S-parameter definition to multiport networks having conventional single-ended and differential ports, as is the case for operational amplifiers, transformers and baluns. To give maximum generality to this technique, for example, allowing for complex S-parameter reference impedances, the mathematical derivation will be carried out with the most general definition of the S-parameters. The presented approach gives the same results already published for circuits with differential ports only when the required simplifications are applied

In this paper, a Doherty power amplifier for K-band point-to-point microwave radio, developed in TriQuint GaAs 0.15-μm PWR pHEMT monolithic technology, is presented. Highly efficient driver stages on both the main and auxiliary branches have been designed and optimized to boost gain with minimal impact on power-added efficiency. The selected architecture enables a modular combination to reach higher power levels. Matching network structures have been designed, according to simple equivalent circuit approaches, to obtain the desired 10% fractional bandwidth. The fabricated power amplifier (PA) exhibits, at 24 GHz in continuous-wave conditions, an output power of 30.9 dBm, with a power-added efficiency of 38% at saturation and 20% at 6 dB of output power back-off, together with a gain of 12.5 dB. System-level characterization at 24 GHz, in very demanding conditions, with a 28-MHz channel 7.5-dB peak-to-average ratio modulated signal, showed full compliance with the standard emission mask, adopting a simple predistorter, with average output power of 23.5 dBm, and average efficiency above 14%. The measured performance favorably compare with other academic and commercial K-band PAs for similar applications.