A series of ZnO-doped nitrogen-carbon materials (xZnO-N-C) with ZnO contents of 5–40% are prepared by a vacuum curing–carbonization strategy using polyamide-imide as the N-C source and zinc nitrate as the metal source for propane dehydrogenation (PDH). 20ZnO-N-C exhibits outstanding initial activity (propane conversion of 35.2% and propene yield of 24.6%) and a relatively low deactivation rate (0.071 h⁻¹) at 600 °C. The results of detailed characterization show that small ZnO nanoparticles (5.5 nm) with high dispersion on the catalyst can be obtained by adjusting the ZnO loading. Moreover, more nitrogen-based species, especially ZnN_x species, are formed on 20ZnO-N-C in comparison with 20ZnO-N-C-air prepared via curing carbonization without vacuum, which may contribute to the higher product selectivity and catalytic stability of 20ZnO-N-C. The active sites for the PDH reaction on the catalyst system are proposed to be C=O species and Zn²⁺ species. Moreover, the carbon deposition and the aggregation of ZnO nanoparticles are the causes of activity loss on this catalyst system.

A series of ZnO doped nitrogen-carbon materials (xZnO-N-C) with ZnO content of 5-40% are prepared by vacuum curing-carbonization strategy using polyamide-imide as N-C source and zinc nitrate as metal source for propane dehydrogenation (PDH). 20ZnO-N-C exhibits outstanding initial activity (propane conversion of 35.2% and propene yield of 24.6%) and relatively low deactivation rate (0.071 h-1) at 600 ◦C. The detailed characterization results show that small ZnO nanoparticles (5.5 nm) with high dispersion on the catalyst could be obtained by adjusting ZnO loading. Moreover, much more nitrogen-based species especially ZnNx species are formed on 20ZnO-N-C by comparison with 20ZnO-N-C-air prepared by curing-carbonization without vacuum, which may contribute for the higher product selectivity and catalytic stability of 20ZnO-N-C. The probable active sites for PDH reaction on the catalyst system are proposed to be C=O species and Zn2+ species. Moreover, the aggregation of ZnO nanoparticles is the primary reason for the activity loss on this catalyst system. The present finding not only provides the feasible construction strategy for the metal oxide doped nitrogen-carbon materials but also valuable guidance for the design of efficient catalyst in dehydrogenation of light alkane.