Significance: The practical application of passive elastic metasurfaces is severely hindered by its intrinsic narrow-band performance due to the underlying locally resonant nature. In this study, we present the concept of “intentional nonlocality” as the fundamental mechanism to design broadband elastic metasurfaces for the control of stress waves in solid media. The nonlocal design breaks the strict dependence on the local resonance of the unit cells and allows crafting an elaborate frequency-wavenumber-dependent response that guarantees remarkable broadband performance. This approach eliminates the most significant barrier to the development of elastic metasurface-based devices and paves the way to a wide range of practical applications.
Additively manufactured austenitic stainless steels exhibit numerous microstructural and morphological differences compared to their wrought counterparts that will influence the metals corrosion resistance. The characteristic as-printed surface roughness of powder bed fusion (PBF) stainless steel parts is one of these morphological differences that increases the parts susceptibility to localized corrosion. This study experimentally determines the average surface roughness and breakdown potential (Eb) for PBF 316L in 6 surface finished states: as-printed, ground with SiC paper, tumble polished in abrasive media, electro-polished, chemically passivated, and the application of a contour/re-melt scan strategy. In general, a smaller average surface roughness led to a larger Eb. The smoothest surface treatments, ground and electro-polished conditions, led to Eb near the materials limit (~+1.0 VAg/AgCl) while all other surface treatments exhibited significantly lower Eb (~+0.3 VAg/AgCl) The build angle was also shown to impact surface roughness, where surfaces at high angles from the build direction resulted in larger roughness values, hence lower Eb.