In 2013, during Typhoon Soulik, wind data were collected at various heights above the ground (15, 27, 53, 67, and 82 m) on the 550 kV 52# pole transmission tower in Ningde City, Fujian Province. The wind speed profile, turbulence intensity, gust factor, crest factor, and power spectrum were analyzed using 10 min interval wind speed records. The results show the following: (1) the average wind velocity of Typhoon Soulik varies in accordance with both the power law and the logarithmic law, but the Deaves–Harris model exhibits significant discrepancies; (2) the turbulence intensity in $u$, $v$, and $w$ orientations decreases with the average wind velocity at each height. Exponential fitting is conducted on the strength of turbulence and gust factor profiles in each direction based on the standards of different countries, resulting in the derivation of empirical expressions; (3) the integral scale components of turbulence in $u$, $v$, and $w$ orientations exhibit a positive correlation with both average wind velocity and height. The turbulence integral scale ratios in the longitudinal, transverse, and vertical directions at heights of 15, 53, and 82 m are 1:0.68:0.11, 1:0.67:0.27, and 1:0.67:0.30, respectively; (4) the Von Karman empirical spectrum and the modified Kaimal cross-spectrum model closely match the observed wind power spectrum of Typhoon Soulik. The presented results contribute to furthering references for wind-resistant design of structures in typhoon-prone areas and prevention of typhoon-related disasters.

In this study, a numerical model of the cable cabin of a comprehensive pipe gallery was established to study the smoke flow diffusion behaviour of a comprehensive pipe gallery fire under a rectangular cross-section. The effects of fire source power (Q = 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 MW) and fire source location (D = 10, 20, 40, 50, 60, 80, 100 m) on the smoke flow characteristics—such as smoke layer height and thickness, longitudinal airflow velocity, and ceiling temperature distribution—were analysed, and the corresponding prediction model was fitted. The results show the following: (1) The height of the smoke layer decreases with increasing fire power, and the predictive model of the smoke layer thickness obtained from the fitting is proportional to the smoke mass flow rate and inversely proportional to the aspect ratio of the pipe gallery. (2) Longitudinal air velocity prediction models of D < 50 m and D ≥ 50 m are fitted, and the average error between them and the numerical simulation values is 9.611%. (3) The temperature decay gradient of the smoke decreases gradually with increasing distance from the fire source, while there is a significant temperature difference between the two sides of the fire source. The average relative errors of the dimensionless temperature rise models fitted upstream and downstream of the fire source in the form of $\frac{\Delta T}{T_0}=A{e}^{B\left(\frac{D-X}{H}\right)+C}$ exponentials with respect to the numerical simulations were 11.688% and 7.296%, respectively. The results of the study can provide a reference for smoke flow and fire prevention and control in comprehensive pipe galleries.