A broad range of synthetic trabecular-like metallic lattices are 3D printed, to study the extra design freedom conferred by this new manufacturing process. The aim is to propose new conceptual types of implant structures for superior bio-mechanical matching and osseo-integration: synthetic bone. The target designs are 3D printed in Ti-6Al-4V alloy using a laser-bed process. Systematic evaluation is then carried out: (i) their accuracy is characterised at high spatial resolution using computed X-ray tomography, to assess manufacturing robustness with respect to the original geometrical design intent and (ii) the mechanical properties - stiffness and strength - are experimentally measured, evaluated, and compared. Finally, this new knowledge is synthesised in a conceptual framework to allow the construction of so-called implant design maps, to define the processing conditions of bone tailored substitutes, with focus on spine fusion devices. The design criteria emphasise the bone stiffness-matching, preferred range of pore structure for bone in-growth, manufacturability of the device and choice of inherent materials properties which are needed for durable implants. Examples of the use of such maps are given with focus on spine fusion devices, emphasising the stiffness-matching, osseo-integration properties and choice of inherent materials properties which are needed for durable implants. STATEMENT OF SIGNIFICANCE: We present a conceptual bio-engineering design methodology for new biomedical lattices produced by additive manufacturing, which addresses some of the critical points in currently existing porous implant materials. Amongst others: (i) feasibility and accuracy of manufacturing, (ii) design to the elastic properties of bone, and (iii) sensible pores sizes for osseointegration. This has inspired new and novel geometrical latticed designs which aim at improving the properties of intervertebral fusion devices. In their fundamental form, these structures are here fabricated and tested. When integrated into medical devices, these concepts could offer superior medical outcomes.

Surface observations are used to elucidate the deformation mechanisms responsible for the superplastic effect in Ti–6Al–4V. High-temperature in-situ tests for tensile and shear deformation modes are performed in the scanning electron microscope at temperatures in excess of 700∘ C. Grain boundary sliding is predominant; the micro-mechanics of accommodation are consistent with the dislocation-based Rachinger theory. The volume fraction of β plays a crucial role. For temperatures greater than 850 °C, the α grains remain unaffected; cavitation is minimal and slip bands needed for dislocation-based accommodation are detected in the β phase but are absent in α. At this temperature, grain neighbour switching is observed directly under shear deformation. At a temperature lower than 850∘ C, the β volume fraction is lower and a different mechanism is observed: slip bands in α and cavitation are found to accommodate grain boundary sliding. In addition, an increase in the α phase intragranular dislocation activity triggers the formation of subgrains and dynamic recrystallisation, consistent with the Rachinger dislocation creep effect. For temperatures lower than 700∘ C, superplasticity is absent; classical creep behaviour controlled by dislocation climb persists. A numerical treatment is presented which accounts for the Rachinger effect. The computational results are used to deconvolute the contributions of each of the competing mechanisms to the total strain accumulated

The contribution of a microtwinning mechanism to the creep deformation behaviour of single crystal superalloy MD2 is studied. Microtwinning is prevalent for uniaxial loading along 〈011〉 at 800°C for the stress range 625 to 675 MPa and 825°C for 625 MPa. Using quantitative stereology, the twin fraction and twin thickness are estimated; this allows the accumulated creep strain to be recovered, in turn supporting the role of the microtwinning mode in conferring deformation. Atom probe tomography confirms the segregation of Cr and Co at the twin/parent interface, consistent with the lowering of the stacking fault energy needed to support twin lengthening and thickening. A model for diffusion-controlled growth of twins is proposed and it is used to recover the measured creep strain rate. The work provides the basis for a thermo-mechanical constitutive model of deformation consistent with the microtwinning mechanism

The role of boron in promoting ductility at high temperature in a prototype nickel-based superalloy designed for industrial gas turbines is studied. Both a boron-containing and boron-free variant are tested in tension at 750 °C, with further in-situ tests carried out using scanning electron microscopy (SEM), to clarify the mechanism of ductility improvement. The improvement in ductility is observed to be greater at the lowest investigated strain rate, where the grain boundary character plays a significant role on the mechanical properties; no ductility improvement was observed at the highest investigated strain rate. The in-situ tests were also performed at 750 °C and revealed directly the greater susceptibility of the grain boundary morphology in the boron-free case to fracture and – in the boron-containing case – the mechanism of ductility enhancement. The findings are supported further by high-resolution electron backscattered diffraction (HR-EBSD) strain mapping which confirms that the distribution of elastic strain and geometrically necessary dislocation (GND) content are influenced markedly by boron addition. The mechanism through which boron indirectly enhances the mechanical properties at elevated temperatures is discussed