Aiming to solve the problems of insufficient dynamic responses, the large loss of energy storage life of a single power cell, and the large fluctuation in DC (direct current) bus voltage in fuel cell vessels, this study takes a certain type of fuel cell ferry as the research object and proposes an improved equivalent minimum hydrogen consumption energy management strategy, based on fuzzy logic control. First, a hybrid power system including a fuel cell, a lithium–iron–phosphate battery, and a supercapacitor is proposed, with the simulation of the power system of the modified mother ship. Second, a power system simulation model and a double-closed-loop PI (proportion integration) control model are established in MATLAB/Simulink to design the equivalent hydrogen consumption model and fuzzy logic control strategy. The simulation results show that, under the premise of meeting the load requirements, the control strategy designed in this paper improves the Li-ion battery’s power, the Li-ion battery’s SOC (state of charge), the bus voltage stability, and the equivalent hydrogen consumption significantly, compared with those before optimization, which improves the stability and economy of the power system and has certain practical engineering value.

Ship engine misfire faults not only pose a serious threat to the safe operation of ships but may also cause major safety accidents or even lead to ship paralysis, which brings huge economic losses. Most traditional fault diagnosis methods rely on manual experience, with limited feature extraction capability, low diagnostic accuracy, and poor adaptability, which make it difficult to meet the demand for high-precision diagnosis. To this end, a fusion intelligent diagnostic model—ResNet–BiLSTM—is proposed based on a residual neural network (ResNet) and a bidirectional long short-term memory network (BiLSTM). Firstly, a multi-scale decomposition of the instantaneous rotational speed signal of a ship’s engine is carried out by using the continuous wavelet transform (CWT), and features containing misfire fault information are extracted. Subsequently, the extracted features are fed into the ResNet–BiLSTM model for learning. Finally, the intelligent diagnosis of ship dual-fuel engine misfire faults is realized by the classifier. The model combines the advantages of ResNet18 in image feature extraction and the capability of BiLSTM in temporal information processing, which can efficiently capture the time-frequency features and dynamic changes in the fault signal. Through comparison experiments with fusion models AlexNet–BiLSTM, VGG–BiLSTM, and the existing AlexNet–LSTM and VGG–LSTM models, the results show that the ResNet–BiLSTM model outperforms the other models in terms of diagnostic accuracy, robustness, and generalization ability. This model provides an effective new method for intelligent diagnosis of ship dual-fuel engine misfire faults to solve the traditional diagnostic methods’ limitations.

Electric motors are indispensable electrical equipment in ships, with a wide range of applications. They can serve as auxiliary devices for propulsion, such as air compressors, anchor winches, and pumps, and are also used in propulsion systems; ensuring the safe and reliable operation of motors is crucial for ships. Existing deep learning methods typically target motors under a specific operating state and are susceptible to noise during feature extraction. To address these issues, this paper proposes a Resformer model based on bimodal input. First, vibration signals are transformed into time–frequency diagrams using continuous wavelet transform (CWT), and three-phase current signals are converted into Park vector modulus (PVM) signals through Park transformation. The time–frequency diagrams and PVM signals are then aligned in the time sequence to be used as bimodal input samples. The analysis of time–frequency images and PVM signals indicates that the same fault condition under different loads but at the same speed exhibits certain similarities. Therefore, data from the same fault condition under different loads but at the same speed are combined for cross-domain motor fault diagnosis. The proposed Resformer model combines the powerful spatial feature extraction capabilities of the Swin-t model with the excellent fine feature extraction and efficient training performance of the ResNet model. Experimental results show that the Resformer model can effectively diagnose cross-domain motor faults and maintains performance even under different noise conditions. Compared with single-modal models (VGG-11, ResNet, ResNeXt, and Swin-t), dual-modal models (MLP-Transformer and LSTM-Transformer), and other large models (Swin-s, Swin-b, and VGG-19), the Resformer model exhibits superior overall performance. This validates the method’s effectiveness and accuracy in the intelligent recognition of common cross-domain motor faults.

Nowadays, the increasingly serious environmental pollution and energy problems urgently require internal combustion engine-based transportation vehicles to upgrade or replace, so the new energy transportation vehicles based on hybrid power and fuel cells have gradually stepped on the stage and continue to innovate. The shipping industry is one of the main sources of global greenhouse gas emissions. The development of clean energy ships represented by fuel cells has attracted wide attention. Fuel cell has the advantages of clean, pollution-free and low noise, but it has some disadvantages such as insufficient dynamic response performance and fast performance decay. Limited by the characteristics of a single energy source, a variety of energy sources and bidirectional DC converters are usually mixed together to form a hybrid ship to improve the flexibility, stability and economy of the ship, and enhance its adaptability to complex sea conditions through the reconfiguration of power system energy. Taking fuel cell ferry "FCS Alsterwasser" as the research object, this study proposed an improved equivalent minimum hydrogen consumption energy management strategy based on fuzzy logic control. First, the power system of the modified mother ship was simulated, and a hybrid power system including fuel cell, lithium iron phosphate battery and supercapacitor was proposed. Then, the dynamic system simulation model and double closed loop PI control model are established in MATLAB/Simulink, and the reliability of the model is verified by the simulation analysis of charge and discharge characteristics. Then, the feasibility of the proposed method is demonstrated by designing simulation experiments based on typical working conditions of the mother ship. The simulation results show that under the premise of meeting the load requirements, the control strategy designed in this paper has a better optimization effect than the S-type penalty function in terms of lithium battery power, lithium battery SOC, bus voltage stability and equivalent hydrogen consumption, which improves the stability and economy of the power system, and has certain engineering practical value.