When realizing an elastic metamaterial beam, beam-like resonators are regarded as the simplest forms of distributed resonators and their influences on the 1st flexural wave bandgap have been well studied. In this letter, to study the relation between the curvature of the beam-like resonators and the high-order bandgaps (specifically, the 2nd and 3rd bandgaps) and make the bandgaps tunable, we propose a metamaterial beam with a periodic array of two-way shape memory alloys (SMAs). The considered aging-treated Ni-rich Ti-Ni SMAs remember a curved shape with a central angle of at high temperature (austenite phase, A phase) and a flat shape at low temperature (rhombohedral phase, R phase) without the bias springs required for conventional one-way SMAs. Our analyses show that, while reducing the performance of the 1st bandgap, the central frequency of the 2nd (3rd) bandgap of the metamaterial beam with flat-curved SMAs can be decreased by 30.1% (18.3%) with an increase in the bandgap width by 35.9% (19.7%) compared to that with the flat-flat SMAs. In addition, the first torsional mode-induced flexural bandgap is widened and lowered when using the curved beam resonators. The proposed SMA-based metamaterial utilizing the two-way shape memory effect thus offers a flexible and diverse route for tuning the bandgaps.
20 February 2024 in International Journal of Mechanical Sciences
Torsional vibrations are unavoidable in beam-type structures in various engineering practices, and the advent of metamaterials provides a solution through the generation of bandgaps. However, unlike their flexural counterparts, tunable torsional bandgaps are seldomly studied due to two major difficulties: the existing metamaterial's units are less torsional-sensitive and the reliable torsional sensing techniques for validations are less available. In this work, switchable torsional bandgaps are realized in a metamaterial beam with a bistable resonator design based on Kresling origami with attached eccentric balls. We find that, through compression–torsion interaction of the proposed origami resonators and the corresponding wave-coupling phenomenon, torsional bandgaps can be generated and efficiently tuned, which leads to lower and wider vibration isolation frequency zones. Thanks to bistability, Kresling resonators arranged with eccentric balls can achieve bandgap switching. Specifically, based on the compression–torsion interaction of the bistable Kresling origami, wave coupling will be weakened/enhanced when the Kresling resonators arranged with eccentric balls turn from the 1st/2nd state to the 2nd/1st state, and, thus, the switching of torsional bandgaps can be realized. In order to experimentally validate the tunable torsional bandgaps, a high-sensitive fiber Bragg grating (FBG) displacement sensing system containing two parallel FBG sensors is set up to extract the torsional responses. This research will be helpful for future studies focusing on regulating torsional waves through compression–torsion interaction and mode conversion utilizing wave coupling.
26 January 2023 in International Journal of Mechanical Sciences
Adaptive elastic metamaterials are generally tunable but not switchable. Here, the word “switchable” means switching between different bandgap mechanisms, such as from the local resonance bandgaps to the Bragg scattering bandgaps and vice versa. In this work, to achieve switchable bandgaps, we report a new class of elastic metamaterials whose transmission properties can be significantly tuned by curved two-way shape memory alloy (SMA) resonators. The proposed switchable metamaterial possesses bandgaps capable of being switched back and forth between the Bragg scattering and localized resonance ones. Without thermally activating the curved SMA resonators, the metamaterial beam behaves as a phononic crystal beam whose bandgaps are formed by a periodic array of concentrated masses. By heating the SMAs, the SMAs recover their original curved shape and lift the concentrated masses to form the local resonance bandgaps. The reversible dramatic variation in shape and the stiffness of the SMA resonators allows the bandgaps to be switchable and of course tunable. In addition, the equivalent spring stiffness of a curved beam at two possible directions for the first two modes is derived based on Castigliano's second theorem and is experimentally validated. Compared to SMA springs, the curved shape SMAs allow the generation of high-order local resonance bandgaps. If thermally activated at different temperatures, the negative effective mass density can further be tunable. To the author's knowledge, this work is the first theoretical and careful experimental investigation realizing switchable metamaterials using the two-way shape memory alloys.
11 May 2023 in International Journal of Mechanical Sciences