Chelating agents’ application for well stimulation is gaining more and more interest, as they can perform under harsh conditions. However, the mutual influence of surfactants and chelating agents on the wettability alteration of hydrophobic carbonate rock under conditions of high-temperature well stimulation is relatively unexplored. This paper aims to study interfacial processes on the surface of hydrophobic rock in the presence of the EDTA-based chelating agent and surfactants of different classes. Cationic (cetyltrimethylammonium bromide, CTAB, and cetylpyridinium bromide, CPB), anionic (sodium dodecyl sulfate, SDS), and amhoteric (alkyldimethyl aminooxide, AO) surfactants were studied. Wettability alteration of model hydrophobic rock was studied under conditions specific to well stimulation. It was shown that chelating agent (CA) alone and its mixture with SDS could not lead to sufficient wettability alteration. CTAB, CPB, and AO were able to change the wettability effectively. A synergistic effect between CA and these surfactants was observed and a possible mechanism was proposed. AO was selected as the most promising surfactant. The influence of surfactant on the CA’s dissolution capacity towards carbonate rock was investigated; dissolution capacity strongly depends on wettability alteration. Finally, the effect of CA, AO, and their mixture on the wettability of aged reservoir rock was studied and the absence of negative effects was proven.

Hydraulic fracturing (HF) is currently the most widespread and effective method of oil production stimulation. The most commonly used fracturing fluid is crosslinked guar gels. However, when using these systems, problems such as clogging of the pore space, cracking, and proppant packing with the remains of the undestroyed polymer arise. Therefore, the efficiency of the hydraulic fracturing process decreases. In this work, compositions based on viscoelastic surfactants (VES) and synthetic polymers (SP) were considered as alternatives capable of minimizing these disadvantages. Most often, the possibility of using a composition as a fracturing fluid is evaluated using rotational viscometry. However, rotational viscometry is not capable of fully assessing the structural and mechanical properties of fracturing fluid. This leads to a reduced spread of systems based on VES and SP. This paper proposes an integrated approach to assessing the effectiveness of a water-based fracturing fluid. The proposed comprehensive approach includes an assessment of the main characteristics of water-based fracturing fluids, including an analysis of their structural and mechanical properties, which is based on a combination of rotational and oscillatory rheology and a comparative analysis of methods for studying the influence of fluids on the reservoir rock. The use of the developed approach to assess the technological properties of fracturing fluids makes it possible to demonstrate the potential applicability of new, unconventional fracturing fluids such as systems based on VES and SP.

Today, a significant part of production wells’ stock has a high water cut percentage of 90% and above. Obviously, for this reason, the need to develop new and improved existing technologies for water shut-off in wells increases every year. Physico-chemical methods of water shut-off are based on the application of special reagents and compositions that plug the pathways of water inflow to the well. Depending on the mechanism and specific features of water barrier formation, isolation methods are divided into selective and non-selective. This article investigates the possibility of using hydrolyzed polyacrylonitrile as a gel-forming and precipitation-forming reagent for water shut-off technologies in production wells. A surfactant–polymer composition for the isolation of water inflow in production wells in objects with high salinity in formation water, possessing physical and chemical selectivity and providing permeability reduction only in water-saturated intervals, is proposed. The developed composition is the invert emulsion, which makes it possible to carry out treatment at a distance from the well and solve the problem of possible premature gel formation directly in the wellbore. The lowest effective concentration of HPAN in an aqueous solution for use as a gel-forming and sedimentation reagent was determined experimentally (5.0 wt% and more). The interaction of the polymer solution with a chromium crosslinker allows obtaining structured gels in the whole volume of the system. The structure of the gels was evaluated using the Sydansk classifier with the assignment of a letter code from A to J. It was experimentally proved that the structure of the obtained gels depends on the temperature and content of the crosslinking agent in the system; the more crosslinking agent in the composition of the system, the stronger the structure of the resulting gel. The optimal ratio of polymer and crosslinking agent to obtain a strong gel was obtained, which amounted to 5:1 by weight of dry polymer powder. For the HPAN concentration of 5 wt% according to the Sydansk classifier, the gel structure had the code “H”—slightly deformable non-flowing gel. The dependence of the volume of gel sediment obtained because of the interaction with mineralized water on the polymer concentration was studied. It was proved that an increase in the concentration of hydrolyzed polyacrylonitrile in the solution, as well as an increase in the concentration of calcium ions in mineralized water, leads to a larger volume of the resulting gel or precipitate and to the strengthening of the gel structure. The results of rheological studies of the developed composition, as well as experiments on thermal stability, are presented. The results of filtration tests on bulk reservoir models demonstrated the selectivity of the developed composition. The obtained value of the residual resistance factor for the oil-saturated low-permeability model was 1.49 units; the value of the residual resistance factor for the water-saturated high-permeability model was 18.04 units. The ratio of the obtained values of the residual resistance factor, equal to 0.08 (much less than 1), can characterize the developed composition as a selective material for water shut-off in producing wells. Existing technologies for water shut-off based on HPAN do not allow for making a treatment at a distance from the well and require the use of technological solutions to prevent premature gel sedimentation in the well. The developed composition makes it possible to solve the problem of premature gelation. In addition, the composition can form a blocking screen in highly permeable water-saturated zones. The development can be useful for deposits with difficult conditions (high mineralization in reservoir waters, boreholes with a horizontal end, elevated temperatures up to 80 °C).

Chelating agents’ application for EOR and well stimulation is fast growing nowadays. However, reagents of this class have some drawbacks, with high values of interfacial tension (IFT) being among them. IFT may be lowered with the addition of surfactants; however, the simultaneous application of chelating agents and surfactants has not yet been widely studied. This paper focuses on the experimental and theoretical investigation of the interaction between chelating agent (ethylenediaminetetraacetic acid, EDTA) and surfactants of anionic and cationic types (sodium dodecyl sulfate, SDS, and dodecyl trimethynlammonium bromide, DTAB). IFT measurement was performed at ambient conditions, with normal octane being as the reference hydrocarbon to eliminate the temperature and salinity effects and compare surfactant-containing systems. The experimental results show that chelating agents’ addition to the solutions of surfactants leads to a decrease in IFT value. Moreover, surfactants’ critical micelle concentration is lowered, whereas their effectiveness and efficiency are increased, which points to the salting-out nature of chelating agents. Molecular dynamics reveal that chelating agent addition causes closer packing of surfactant layer, the decrease in head groups’ hydration, and, at least in the case of SDS, specific surfactant–chelating agent attractive interaction. These molecular-level insights, experimental dependencies, and the combined methodology may be useful for the proper selection of fluids for real-field operations.

In the last decade, hydrogels for hydraulic fracturing based on viscoelastic surfactants have been actively studied. Interest in these systems is justified by their unique qualities: good viscoelasticity and the ability to form stable suspensions of proppant or sand, destruction without the formation of bridging agents, hydrophobization of the rock surface and metal of technological equipment, as well as oil-cleaning properties. These qualities are most often provided by a minimum set of components—a surfactant and an electrolyte. However, the absence of a polymer limits the use of these gels in formations where fluid leakoff is possible. In this article, a liquid was studied, based on a pseudo gemini surfactant (PGVES) with the addition of a water-soluble polysaccharide. The objects of study were selected based on the assumption of interactions between PGVES and the polymer; interactions which favorably influence the technological characteristics of the fracturing fluid. To confirm the hypothesis, rheological studies were carried out. These included rotational viscometry and oscillatory studies at various temperatures. The settling velocity of particles of various proppant fractions was studied and tests were carried out to assess fluid leakoff. The performed experiments show an improvement in the characteristics of the PGVES-based gel under the influence of the polysaccharide. In particular, the rheological properties increase significantly, the stability of proppant suspensions improves, and the fluid leakoff of systems decreases, all of which expands the possibility of using these fracturing fluids and makes this area of experimentation promising.

Acid treatments are one of the methods for intensifying oil and gas production. Corrosion is a significant factor affecting the performance of oilfield equipment. There are many different methods of preventing corrosion, but corrosion inhibitors are most commonly used in industry. The protective effect of the inhibitor is directly determined by the effective adsorption of surfactants on the metal surface. For an indirect assessment of the adsorption of the inhibitor, a comprehensive research method is proposed based on the determination of the interfacial tension of acid compositions and steel plates’ contact angle of wetting after corrosion tests. It was found that in hydrochloric acid the adsorption of the inhibitor IC-1 reaches a maximum after 6 h, an increase in the acid concentration in the range of 5–15% wt. has a negative effect on the activity of the inhibitor. For sulfamic acid, the maximum adsorption of the IC-2 inhibitor is observed after 24 h, an increase in acid concentration has a positive effect on surfactants.