In order to solve the testing and verification problems at the early development stage of a high-speed Maglev positioning and speed measurement system (MPSS), a hardware-in-the-loop (HIL) simulation platform is presented, which includes induction loops, transmitting antennas, a power driver unit, a simulator based on a field-programmable gate array (FPGA), a host computer, etc. This HIL simulation platform simulates the operation of a high-speed Maglev train and generates the related loop-induced signals to test the performance of a real ground signal processing unit (GSPU). Furthermore, an absolute position detection method based on Gray-coded loops is proposed to identify which Gray-coded period the train is in. A relative position detection method based on height compensation is also proposed to calculate the exact position of the train in a Gray-coded period. The experimental results show that the positioning error is only 2.58 mm, and the speed error is 6.34 km/h even in the 600 km/h condition. The proposed HIL platform also effectively simulates the three kinds of operation modes of high-speed Maglev trains, which verifies the effectiveness and practicality of the HIL simulation strategy. This provides favorable conditions for the development and early validation of high-speed MPSS.
This paper proposes a dynamic-projection-integrated particle-filtering-based identification strategy for the friction characteristic curve of a train wheelset under the slipping fault condition. This strategy aims to achieve the identification of the fault friction characteristic curve (FFCC) in the early slipping fault stage. First, a multi-dimensional integrated particle-filtering (MDIPF)-based parameters correction method is proposed. The MDIPF constructs an error particle state transition model encompassing multi-dimensional parameters, which integrates inter-particle correlation to facilitate error fusion during the state transition process. Then, a dynamic projection domain (DPD)-based particle refinement method is proposed. The DPD constructed the contraction factors to dynamically fine-tune the particle projection domain. Finally, a multi-level evaluation-based identification method for the FFCC is proposed. And the dynamic-projection-integrated particle-filtering-based identification strategy is validated, which can actualize the rapid and accurate identification of the FFCC.