The purpose of the presented research is to investigate the effect of La3+ ions substitution for Fe3+ ions in Ni0.42Zn0.58LaxFe2-xO4 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) ferrite compositions prepared by the innovated glycine-nitrate process based on auto-combustion method. Structural and magnetic properties of examined samples were estimated by the analysis of X-ray spectra, EDAX spectrum, SEM micrographs, thermomagnetic characteristics, magnetic hysteresis loops and complex permeability spectra.
The influence of Ce 3+ ions substitution for Fe 3+ ions in Ni 0.42 Zn 0.58 Ce x Fe 2−x O 4 ( x = 0, 0.02, 0.04, 0.06, 0.08, and 0.10) compounds on the selected magnetic properties and structure was investigated. The samples were synthesized by means of wet glycine–nitrate technology annealed at the temperature 1200 °C for 6 h. The wide spectrum of characterization methods, such as X-ray spectroscopy, Energy Dispersive X-ray analysis (EDAX) analysis, SEM micrographs, thermomagnetic analysis, magnetic hysteresis loop measurement, and complex permeability spectra, was used for the study of relevant properties of synthetized materials.
4 April 2024 in Journal of Physics: Condensed Matter
Auto-combustion process was used for synthetization of Ni1−xZnxFe2O4 and Ni1−xZnxLa0.02Fe1.98O4 (x = 0, 0.3, 0.5, 0.64 and 0.7) ferrite samples to investigate their structural and selected magnetic properties. Standard characterization method such as x-ray diffraction, magnetic susceptibility temperature dependencies measurement, low-frequency hysteresis loops recording and complex permeability spectra were used on the research samples. The monophasic ferrite compounds have been prepared. For all samples, with an increase of zinc ions in the content, a decrease of the Curie temperature and coercive field value and an increase of the complex permeability real part value were observed, together with a shift of the ferrimagnetic resonance frequency value to lower ones. Substituted samples showed some differences, such as slightly higher values of the Curie temperature and coercive field, and at the same time slightly lower values of the complex permeability real part and higher values of the ferrimagnetic resonance frequency.
The effect of lanthanum (La) substitution and sintering temperature variation on the selected parameters of nickel–zinc ferrites was the subject of our analysis. To determine the structural parameters, we used X-ray diffraction (XRD) along with scanning electron microscopy (SEM) micrographs. The magnetic properties of ferrites were measured by applying the methods of thermomagnetic analysis and using the hysteresis loop measurements. Moreover, to analyze the magnetic behavior of prepared polymer composites, we used the results of measuring the frequency dependences of the complex permeability. The ferrite filler content in all the investigated composites was 60 vol% and epoxy resin was used as the polymer matrix. The conducted research represents a comprehensive study of doped ferrites covering a remarkable range of sintering temperatures at a constant ratio of input materials.