Since a multiaxial loading environment may lead to the fatigue failure of structures, establishing a reliable fatigue model to predict the multiaxial fatigue lives of structures has always been a concern of engineers. This study proposes a new multiaxial fatigue theoretical model (WYT model) based on the critical plane theory, which takes the plane of the maximum shear strain amplitude as the critical plane and considers the effects of shear stress and normal stress on fatigue damage. Moreover, a backpropagation neural network (BPNN) model for multiaxial fatigue life prediction with the shear strain amplitude, normal strain amplitude, mean shear stress, and mean normal stress on the same critical plane as input parameters and fatigue life as the output variable is established. Finally, the WYT model and the BPNN model are compared with two existing multiaxial fatigue models to evaluate the life prediction effects of different models for S45C and 7075-T651 under constant-amplitude and variable-amplitude multiaxial loadings. The calculation results show that the WYT model is feasible, and the BPNN model is more accurate in predicting the fatigue lives of specimens than other multiaxial fatigue theoretical models.
The fatigue failure of a structure may occur under a multiaxial vibration environment; it is necessary to establish a better multiaxial fatigue life prediction model to predict the fatigue life of the structure. This study proposes a new model (MWYT) by introducing the maximum absolute shear stress into the WYT model. The feasibility of the MWYT model is verified by using the multiaxial fatigue experimental data of 304 stainless steel, Q235B steel, 7075-T651 aluminum alloy and S355J0 steel. Further, finite element vibration simulations are performed on a typical parallel hydraulic pipe structure, and the vibration simulation results of the pipe structure are verified through the vibration experiment. Finally, the MWYT model is used to predict the fatigue lives of the pipe structure under random excitation and pulsation excitation, respectively, and the fatigue life of the pipe structure under the combined loading from random excitation and pulsation excitation is predicted based on Miner’s rule. By comparing with the design life of the aircraft, the predicted life of the pipe structure meets the service requirements for it.