This study provides a solution to determine the porosity evolution of huge thick carbonates accurately using PetroMod version 2016.2 software with a cementation tool. The Lower Paleozoic carbonates from the Tazhong Uplift (Tarim Basin) were taken as examples. Results show that the errors of modeled porosity decreased from 256.3%–468.8% to 6.7%–12.5% for low-porosity carbonates and from 15.0%–22.9% to 2.9%–5.0% for high-porosity carbonates, indicating a better fit to the measured values after considering carbonate cementation. The calibrated model incorporating cementation exhibits typically low carbonate porosities and burial depths but high thermal conductivities, resulting in much lower formation temperatures, maturities, and hydrocarbon masses than the uncalibrated model. This study indicated that carbonate cementation plays a very important role in the reduction of carbonate porosity, and it is necessary to calibrate the thick-carbonate porosity model using the cementation tool. Although this method has certain feasibility and practicability and can be utilized widely to model huge thick carbonates, it has a limitation in recovering the increase in porosity caused by postdiagenesis.
In recent years, new oil reservoirs have been discovered and exploited in the ninth member (Chang 9 Member, T3y9) of the Upper Triassic Yanchang Formation (T3y) in the Longdong area, Ordos Basin. Some studies have shown that the crude oils of the Chang 9 Member may originate from the Chang 9 source rock in some areas, which may be related to the distribution of the source rock. However, the distribution of the Chang 9 source rock in the Longdong area is still unclear, which hinders further exploration and development of petroleum. In this study, we established a multiple linear regression model for predicting total organic carbon (TOC) based on the relationship between well-logging parameters and measured TOC values of shale core samples from 30 wells in the study area. The results show that the Chang 9 shale is mainly composed of gray and dark mudstones, which mainly belong to the interdistributary bay and front delta depositional subfacies. The TOC values of the shale core samples from this member vary in a range of 0.11-4.8%, with an average value of 0.96%. Compared with traditional and improved Delta log R models, our model shows a higher accuracy of TOC prediction with R 2 = 0.9181, which meets the requirements for predicting the distribution of the Chang 9 source rock. In the map of the Chang 9 source rock predicted by our model, the thickness of the source rock (TOC >= 1.0%) varies in the range of 1-12 m, showing a decreasing trend from northeast to southwest in the Longdong area. The crude oil in the northeastern areas enjoys a high ratio of 17 alpha(H)-C 30 rearranged hopane and C 30 hopane (C 30*/C 30), and the thickness of the Chang 9 source rock is also greater than in other areas. It is speculated that the Chang 9 Member tight oil in the northeast area is mainly from the Chang 9 source rock, while the oil in other areas is from the Chang 7 source rock. In our study, we presented a method for predicting the source rock distribution, which can be widely used for exploring the tight oil of the Chang 9 Member in the study area.
In recent years, significant breakthroughs have been made in the exploration of both conventional and unconventional oils in the Chang 9 Member of the Upper Triassic Yanchang Formation in the Longdong area. However, the origin of hydrocarbons remains contentious, largely due to insufficient characterization of the source rocks in both the Chang 7 and Chang 9 Members. In this study, the geochemical characteristics and hydrocarbon generation potential of these two members were comprehensively analyzed. The Chang 7 Member is characterized by the development of thick mudstones with high total organic carbon (TOC = 0.25–19.89 wt.%) and significant hydrocarbon generation potential (S 1 +S 2 = 0.29–93.12 mg/g; HI = 72–714 mg/g TOC). In contrast, the mudstones in the Chang 9 Member are relatively thin and exhibit lower organic abundance (TOC = 0.11–4.79 wt.%) and subordinate generation potential (S 1 +S 2 = 0.02–6.53 mg/g; HI = 33–262 mg/g TOC). Biomarker and isotope analyses indicate that the superior hydrocarbon potential and Type II₁ kerogen of the Chang 7 Member are attributable to its highly anoxic lacustrine facies and a mixture of plankton and terrestrial plants. Conversely, the Type II₂ kerogen in the Chang 9 Member, characterized by slightly weaker generation potential, reflects a weakly anoxic deltaic environment with a higher proportion of terrestrial plants. This study provides a comprehensive understanding of the Chang 7 and Chang 9 source rocks and offers an effective theoretical basis for further research on the petroleum system of the Yanchang Formation in the Longdong area.