The increased traffic in e-commerce, cloud-based processing, social media, and online video streaming demands higher data rates. The current 4G has reached the bottleneck, due to which it may not be able to fulfill the high data demand, so the focus is drifting toward millimeter wave (mmWave). The mmWave spectrum ranging from 30 to 300 GHz offers wide bandwidth with low latency, which finds its application in various communication fields, including 5G cellular. Despite its atmospheric attenuation and non-line-of-sight (NLOS) propagation, most countries are currently adopting mmWave 5G at the 28/38 GHz band due to less atmospheric attenuation, low path loss exponent, and low signal spread at these bands. The single-element patch antenna is a compact solution for mmWave applications, but its performance is inferior in terms of bandwidth, gain, and radiation efficiency. The array antennas have overcome these demerits, as it has shown a significant increase in bandwidth, gain, and radiation efficiency. Still, it has a limitation on data rate support. As a result, Multiple-Input-Multiple-Output (MIMO) technology can increase the data rate to 1000 times through spatial diversity and multiplexing techniques. So, to refine the performance further, there is a need to comprehend the MIMO antenna structures designed so far at mmWave. This paper presents the planar MIMO antenna structures developed so far, categorized here as slot, coplanar waveguide, defected ground structures, tapered/Vivaldi, meta-surface/metamaterial, dielectric resonator, and flexible antennas. The performance of these designs is compared based on bandwidth, gain, isolation, efficiency, and radiation pattern. This article also discusses the effects of slots, partial ground, and decoupling structures on impedance matching, bandwidth, and isolation levels. Also, a thorough discussion of the design issues and future work to be undertaken is discussed in this here.

A double-stub matching technique is used to design a dual-band monopole antenna at 28 and 38 GHz. The transmission line stubs represent the matching elements. The first matching network comprises series capacitive and inductive stubs, causing impedance matching at the 28 GHz band with a wide bandwidth. On the other hand, the second matching network has two shunt inductive stubs, generating resonance at 38 GHz. A Smith chart is utilized to predict the stub lengths. While incorporating their dimensions physically, some of the stub lengths are fine-tuned. The proposed antenna is compact with a profile of $0.75{\lambda }_1\times 0.66{\lambda }_1$ (where ${\lambda }_1$ is the free-space wavelength at 28 GHz). The measured bandwidths are 27–28.75 GHz and 36.20–42.43 GHz. Although the physical series capacitance of the first matching network is a slot in the ground plane, the antenna is able to achieve a good gain of 7 dBi in both bands. The proposed antenna has a compact design, good bandwidth and gain, making it a candidate for 5G wireless applications.

Advancement in smartwatch sensors and connectivity features demands low latency communication with a wide bandwidth. ISM bands below 6 GHz are reaching a threshold. The millimeter-wave (mmWave) spectrum is the solution for future smartwatch applications. Therefore, a compact dual-band antenna operating at 25.5 and 38 GHz is presented here. The characteristics mode theory (CMT) aids the antenna design process by exciting Mode 1 and 2 as well as Mode 1–3 at their respective bands. In addition, the antenna structure generates two traverse modes, TM₁₀ and TM₀₂, at the lower and higher frequency bands. The antenna measured a bandwidth (BW) of 1.5 (25–26.5 GHz) and 2.5 GHz (37–39.5 GHz) with a maximum gain of 7.4 and 7.3 dBi, respectively. The antenna performance within the watch case (stainless steel) showed a stable |S₁₁| with a gain improvement of 9.9 and 10.9 dBi and a specific absorption rate (SAR) of 0.063 and 0.0206 W/kg, respectively, at the lower and higher bands. The link budget analysis for various rotation angles of the watch indicated that, for a link margin of 20 dB, the antenna can transmit/receive 1 Gbps of data. However, significant fading was noticed at certain angles due to the shadowing effect caused by the watch case itself. Nonetheless, the antenna has a workable bandwidth, a high gain, and a low SAR, making it suitable for smartwatch and IoT applications.

In this current era of communications and networking, The Internet of things plays the main role in the making of smart communication and networking. In this article, we have focused on the literature survey on wireless sensor networks which are energy efficient. Various standard protocols are reviewed along with some enhanced protocols which makes the network energy efficient. The comparison of the standard and enhanced protocols with respect to various applications in wireless sensor networks is thoroughly done in this article. The outcomes of the enhanced protocols are also briefly discussed. For easier analysis to future researchers, a comparative table which lists the enhanced protocols which are compared with standard counterparts along with the factors for energy efficiency of the protocols. This article also comments on the issues and challenges of the protocols which can be further analyzed for making the wireless sensor network more energy efficient.

This article presents a planar, non-angular, series-fed, dual-element dipole array MIMO antenna operating at 28 GHz with the metasurface-based isolation improvement technique. The initial design is a single-element antenna with a dual dipole array which is series-fed. These dipole elements are non-uniform in shape and distance. This dipole antenna results in end-fire radiation. The dipole antenna excites the $J_1$ mode for its operation. Further, with the view to improve channel capacity, the dipole array expands the antenna to a three-element MIMO antenna. In the MIMO antenna structure, the sum of the $J_1$, $J_2$, and $J_3$ modes is excited, causing resonance at 28 GHz. This article also proposes a metasurface structure with wide stopband characteristics at 28 GHz for isolation improvement. The metasurface is composed of rectangle-shaped structures. The defected ground and metasurface structure combination suppresses the surface wave coupling among the MIMO elements. The proposed antenna results in a bandwidth ranging from 26.7 to 29.6 GHz with isolation improvement greater than 21 dB and a gain of 6.3 dBi. The antenna is validated with the diversity parameters of envelope correlation coefficient, diversity gain, and channel capacity loss.

Broadband antennas with a low-profile generating circular polarization are always in demand for handheld/ portable devices as CP antennas counter multipath and misalignment issues. Therefore, a compact millimeter-wave antenna is proposed in this article. The proposed antenna structure comprises two circular rings and a circular patch at the center. This structure is further embedded with four equilateral triangles at a 90° orientation. The current entering the radiator is divided into left and right circular directions. The equilateral triangles provide the return path for current at the differential phase of ±90°, generating circular polarization. Structural development and analysis were initially performed through the characteristic mode theory. It showed that Modes 1 to 4 generated good impedance matching from 20 to 30 GHz and Modes 1 to 5, from 30 to 40 GHz. It also demonstrated the summation of orthogonal modes leading to circular polarization. The antenna-measured reflection coefficient |S11| > 10 dB was 19 GHz (23–42 GHz), and the axial ratio at −3 dB was 4.2 GHz (36–40.2 GHz). The antenna gain ranged from 4 to 6.2 dBi. The proposed antenna was tested for link margin estimation for IoT indoor conditions with line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. The communication reliability with co- and cross-polarization was also studied under these conditions, and the results proved to be satisfactory.